jagt
How to ping-flood PC1 with clumsy running on PC2
Hello Is there any way I can ping-flood PC1 (my main pc) with clumsy running on PC2 (my secondary pc). Both pcs are using the same network. I can use LAN on PC1 but PC2 allows me to use LAN & Wi-Fi.
I've tried a few methods but I failed miserably. Please, if any of you could help me I will be really grateful.
Idk what you mean by ping-flood (DDOS with clumsy?) so not sure if we want to do the same thing. But i wanted to delay the outgoing traffic from my Gaming PC (PC 1) by running Clumsy on my laptop (PC 2). My setup: I connected PC 1 to PC 2 with LAN directly (crossover but you can use normal LAN cable) and PC 2 to my router. I gave both PCs IP adresses outside of the range of my wifi Router for the crossover connection, set the gateway to the respective other PCs IP adress and enabled sharing the connection to my wifi router in adapter options on PC 2. When i run tracert on PC 1 to any IP on the internet it now routes trough the IP i gave to PC 2.
When i put "outbound and ip.DstAddr = 192.168.137.2" (IP of PC 1), it affects Pinging that adress from PC 2 but nothing changes on PC 1. When i put any other adress like 8.8.8.8 in the filtering it doesnt affect the ping on PC 1 either. But when i just put "inbound" it affects the ping time on both PCs. I just need to figure out rn what i need to set to affect only the outgoing traffic of PC 1.
