inr-kit
After converting some step files, I only get Volumes.i, but I don’t get the MCFile.i I want
Here is the .STEP file I used. 4.txt Here is the McCADInputConfig.i file that I configured. McCADInputConfig.txt Here is the what I did on the command line. I would like to ask whether there is a problem with the file I configured or there are some non-convertible entities in the step file that make it impossible to convert from mcnp file to step file.
C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin>C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin\McCAD.exe` read Running McCAD v1.1 / 2023-08-03 18:03:38
** Loading STEP file(s) **
Processing C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin\test\4.stp Loading input solids. OpenCascade surfaces tally: ========================== - Planes: 277 - Cylinders: 345 - Tori: 6 - Cones: 0 - Spheres: 0 - B-Splines: 0 - Bezier Surfaces: 0 - Surfaces of Revolution: 0 - Surfaces of Extrusion: 0 - Offset Surfaces: 0 - Uknown Surfaces: 0 Execution time [m]: 0.013042
C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin>C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin\McCAD.exe run Running McCAD v1.1 / 2023-08-03 18:03:44
** Loading STEP file **
Processing C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin\test\4.stp Loading input solids. OpenCascade surfaces tally: ========================== - Planes: 277 - Cylinders: 345 - Tori: 6 - Cones: 0 - Spheres: 0 - B-Splines: 0 - Bezier Surfaces: 0 - Surfaces of Revolution: 0 - Surfaces of Extrusion: 0 - Offset Surfaces: 0 - Uknown Surfaces: 0
** Starting decomposition **
Decomposing 23 shape(s) from the input STEP file(s)
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a cylindrical solid
- Decomposing a mixed solid
- Decomposing a mixed solid
Having the same problem here, with a sample geometry. Tried setting debugLevel=3 but no extra outputs. @moatazharb is there a way to view logs of what's happened during a conversion?
