test
test copied to clipboard
imfatant
I cannot seem to get any Rc signal on either DSM or SBUS. Your configure instructions were very helpful btw. I've got the 4_19 rt kernel running, and the latest...
https://rcn-ee.net/rootfs/bb.org/testing/2019-12-01/stretch-console/bone-debian-9.11-console-armhf-2019-12-01-1gb.img.xz
The link to download the https://rcn-ee.net/rootfs/bb.org/testing/2019-12-01/stretch-console/bone-debian-9.11-console-armhf-2019-12-01-1gb.img.xz image is not working. Thank you for an excellent tutorial.
Hello, Do you know how to use the 4 x Motor Driver Outputs on the BeagleBone Blue with the Ardupilot image and Mission Planner? I would like to deploy on...
Configuration done as per your link. No issues faced......Thanks for the wonderful write up..... Now I want to connect Battery BMS on CAN port of BBB to get battery data...
When I plug my gps into the gps jst port there is no power to the gps. My GPS is the (https://www.sparkfun.com/products/12751).
Is the Maxbotix Distance sensor supplied power from the 3v3 BB Blue UART pin?
I'm having trouble getting my receiver to connect to the beaglebone blue. I'm using r9 mini and it is currently bound to my taranis. Not sure if I'm doing anything...
sudo sed -i 's|#dtb_overlay=/lib/firmware/.dtbo|dtb_overlay=/lib/firmware/BB-I2C1-00A0.dtbo\n#dtb_overlay=/lib/firmware/BB-UART4-00A0.dtbo\n#dtb_overlay=/lib/firmware/BB-ADC-00A0.dtbo|g' /boot/uEnv.txt Did you really mean to commit out the UART4 and ADC overlays? note the # in the sed command in the readme instructions
Totally unrelated to deployment of the OS & application on the board, so not an 'issue' at all. But... you seem to know your way around this thing pretty well....
