hyperbart

Hey guys, no problem. Please find it below:  ``` meters: - name: HuisMeter type: template template: eastron id: 1 host: 192.168.4.184 port: 8899 usage: grid modbus: tcpip ``` @VolkerK62...

> Eastron template has phases powers, so this should already work. Re Docker: why not simply > > ``` > docker run -v evcc/evcc evcc meter > ``` Danke @andig...

@andig your changes are pushed to the nightly this night, correct? Tomorrow I should be able to run the meter command again on your nightly and I should see the...

> It would be great if you could test the PR before merging.  ``` [main ] INFO 2024/09/02 09:21:26 evcc 0.130.6 (f5547ba0) [main ] INFO 2024/09/02 09:21:26 using config...

> Let's not confuse things please. I've fixed the circuit. `evcc meter` will still show exactly what's being measured. For reference, Andi, I hope this confirms your fix, I am...

Dynamic would be awesome. Currently I am doing the same when going into the night. In my case I forgot it yesterday and this morning I woke up with my...

> So what would "zero feed in" controller mean? A template mechanism (just as with the charging points or solar inverters) via modbus/protocol which allows EVCC to control the power...

> As an addition to this idea: it might also be that the heatpump is charging with PV surplus but cannot consume all the PV energy. It then would be...

> See [#19715 (comment)](https://github.com/evcc-io/evcc/discussions/19715#discussioncomment-13421941) for related apis. > > > When the charger can consume more or if you for instance plug in your EV, the "dimming" of the PV...

@andig good point. One could solve this by not working with a static zero value but with a variable to be set. Depending on the enable/disable values one should accept...