gCodeViewer
gCodeViewer copied to clipboard
hudbrog
a visual web based gcode analyzer
Not all GCode files end with the extension .gcode. Other extensions used in the industry are .ngc, .mpt, .mpf, .nc and several others. Either expand your restriction, remove your restriction...
The use case is like that: 1. User wants to understand a defect in the printing. 2. User open the gcode file in the viewer and move the layer and...
It would be nice to support G2 and G3 arcs: http://reprap.org/wiki/G-code#G2_.26_G3:_Controlled_Arc_Move
This wonderful plugin has the ability to exclude certain regions of a print, with drawing circles or rectangles into the gcode-viewport. It was extremely useful if layers could be skipped...
Hi! I used your gcode viewer to when i exported from Cura with all the infill lines. Your Gcode viewer somehow only shows the paths which where created in Cura....
Merged: Bed/Nozzle temperature in Layer Info from: https://github.com/hjgode/gCodeViewer
Added code to Worker.js, gCodeReader.js and ui.js to parse and show Nozzle and Bed temperature settings The nozzle and bed temperature settings are shown in the Layer Info for the...
It'd be useful if the viewer showed the nozzle and/or bed temperature during a given layer.
Sometimes it would be nice to know when in a print a layer is supposed to start (even an estimate). Putting this on the layer page would be much easier...
My printer is a CR10S5 so the bedsize isn't the normal 200x200mm and im sure other people's printer sizes varies. This is a quick little change to add the bed...
