I don't see Headphones output in ha audio info on RPi4

[starteleport]

HA Audio version: 2022.07.0 Installation type: Supervised on Raspberry Pi OS

Output of ha audio logs

[19:47:54] INFO: Service restart after closing
s6-rc: info: service legacy-services successfully stopped
s6-rc: info: service legacy-cont-init: stopping
s6-rc: info: service legacy-cont-init successfully stopped
s6-rc: info: service fix-attrs: stopping
s6-rc: info: service fix-attrs successfully stopped
s6-rc: info: service s6rc-oneshot-runner: stopping
s6-rc: info: service s6rc-oneshot-runner successfully stopped
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
cont-init: info: running /etc/cont-init.d/alsa-mixer.sh
[22:48:00] INFO: Adjust ALSA mixer settings for /dev/snd/controlC0
[22:48:00] INFO: Adjust ALSA mixer settings for /dev/snd/controlC1
[22:48:01] INFO: Adjust ALSA mixer settings for /dev/snd/controlC2
cont-init: info: /etc/cont-init.d/alsa-mixer.sh exited 0
cont-init: info: running /etc/cont-init.d/filesystem.sh
cont-init: info: /etc/cont-init.d/filesystem.sh exited 0
cont-init: info: running /etc/cont-init.d/pulse-config.sh
[22:48:02] INFO: Found RaspberryPi system
cont-init: info: /etc/cont-init.d/pulse-config.sh exited 0
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
services-up: info: copying legacy longrun alsa (no readiness notification)
services-up: info: copying legacy longrun pulseaudio (no readiness notification)
s6-rc: info: service legacy-services successfully started
W: [pulseaudio] main.c: Running in system mode, but --disallow-module-loading not set.
W: [pulseaudio] main.c: Home directory of user 'root' is not '/var/run/pulse', ignoring.
W: [pulseaudio] caps.c: Normally all extra capabilities would be dropped now, but that's impossible because PulseAudio was built without capabilities support.
W: [pulseaudio] main.c: OK, so you are running PA in system mode. Please make sure that you actually do want to do that.
W: [pulseaudio] main.c: Please read http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/WhatIsWrongWithSystemWide/ for an explanation why system mode is usually a bad idea.
W: [pulseaudio] module-udev-detect.c: Failed to open /proc/asound/card0: No such file or directory
E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="platform-bcm2835_audio" card_name="alsa_card.platform-bcm2835_audio" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
W: [pulseaudio] module-udev-detect.c: Failed to open /proc/asound/card1: No such file or directory
W: [pulseaudio] module-udev-detect.c: Failed to open /proc/asound/card2: No such file or directory
E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="2" name="platform-fef05700.hdmi" card_name="alsa_card.platform-fef05700.hdmi" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
E: [pulseaudio] module-rescue-streams.c: module-rescue-stream is obsolete and should no longer be loaded. Please remove it from your configuration.
E: [pulseaudio] main.c: Failed to acquire org.pulseaudio.Server: org.freedesktop.DBus.Error.AccessDenied: Connection ":1.179" is not allowed to own the service "org.pulseaudio.Server" due to security policies in the configuration file

Output of pactl list

Card #0
	Name: alsa_card.platform-bcm2835_audio
	Driver: module-alsa-card.c
	Owner Module: 6
	Properties:
		alsa.card = "0"
		alsa.card_name = "bcm2835 Headphones"
		alsa.long_card_name = "bcm2835 Headphones"
		alsa.driver_name = "snd_bcm2835"
		device.bus_path = "platform-bcm2835_audio"
		sysfs.path = "/devices/platform/soc/fe00b840.mailbox/bcm2835_audio/sound/card0"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card"
	Profiles:
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 5100, available: yes)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: output:analog-stereo
	Ports:
		analog-output: Analog Output (type: Analog, priority: 9900, latency offset: 0 usec, availability unknown)
			Part of profile(s): output:analog-stereo

Card #1
	Name: alsa_card.platform-fef00700.hdmi
	Driver: module-alsa-card.c
	Owner Module: 7
	Properties:
		alsa.card = "1"
		alsa.card_name = "vc4-hdmi-0"
		alsa.long_card_name = "vc4-hdmi-0"
		alsa.driver_name = "vc4"
		device.bus_path = "platform-fef00700.hdmi"
		sysfs.path = "/devices/platform/soc/fef00700.hdmi/sound/card1"
		device.form_factor = "internal"
		device.string = "1"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card"
	Profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: output:hdmi-stereo
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability unknown)
			Properties:
				device.icon_name = "video-display"
				device.product.name = "SONY TV"
			Part of profile(s): output:hdmi-stereo

Output of ha audio info

audio:
  application: []
  card:
  - driver: module-alsa-card.c
    index: 0
    name: alsa_card.platform-fef00700.hdmi
    profiles:
    - active: true
      description: Digital Stereo (HDMI) Output
      name: output:hdmi-stereo
    - active: false
      description: "Off"
      name: "off"
  input: []
  output:
  - applications: []
    card: 0
    default: true
    description: Built-in Audio Digital Stereo (HDMI)
    index: 0
    mute: false
    name: alsa_output.platform-fef00700.hdmi.hdmi-stereo
    volume: 1
host: 172.30.32.4
update_available: false
version: 2022.07.0
version_latest: 2022.07.0

Any help would be greatly appreciated.

[cociweb]

W: [pulseaudio] module-udev-detect.c: Failed to open /proc/asound/card1: No such file or directory
W: [pulseaudio] module-udev-detect.c: Failed to open /proc/asound/card0: No such file or directory
E: [pulseaudio] main.c: Failed to acquire org.pulseaudio.Server: org.freedesktop.DBus.Error.AccessDenied: Request to own name refused by policy

[github-actions[bot]]

There hasn't been any activity on this issue recently, so we clean up some of the older and inactive issues. Please make sure to update to the latest version and check if that solves the issue. Let us know if that works for you by leaving a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.