Harald Klein
Harald Klein
the TXS0101DBV as SOT-23 (6)?
I've connected GPIO25 to the right pin of JP5 with a wire, relay works with G3/G5 now. That will do fine until the TXS0101DBV arrives. Thanks for the hint.
The replacement TXS0101DBV did arrive today. After replacement, the relay did still not work. In the end it was the solder joints of R1, apparently one was cold. Re-heating made...
@red13dotnet did it work for you with 27V VMOT?
Example messages for thread timeouts: ~~~ 2015-11-18 18:22:05.040871 7fc1cc1d8700 1 heartbeat_map is_healthy 'OSD::disk_tp thread 0x7fc1c21c4700' had timed out after 60 2015-11-18 18:22:05.040875 7fc1cc1d8700 1 heartbeat_map is_healthy 'OSD::disk_tp thread 0x7fc1c21c4700' had...
iirc that is the max number possible..
works fine on Fedora 29
getting the same error when trying to build with PIO for M5stack Core2. Specifying 1.0.5 in `lib_deps` didn't help..
[Bienenwaage.ino.txt](https://github.com/user-attachments/files/17965888/Bienenwaage.ino.txt) This works ootb, no need for any sim800 installers etc. `[env:ttgo-t-call] src_dir = src platform = espressif32 board = esp-wrover-kit framework = arduino monitor_speed = 115200 lib_deps = TinyGSM...
[Gerber_beescale_PCB_beescale_2024-11-30.zip](https://github.com/user-attachments/files/17965909/Gerber_beescale_PCB_beescale_2024-11-30.zip) [Schematic_beescale_2024-11-30.pdf](https://github.com/user-attachments/files/17965910/Schematic_beescale_2024-11-30.pdf)