Ben Greear
Ben Greear
For the numbers above, is this with wave-1 firmware or wave-2? You said you had the same problem with wave-2: Please open a separate bug to track that, with some...
Does your system work if you use upstream driver and firmware?
Try using known-working x86-64 hardware so that you can at least debug your basic configuration, then once that is working, you can try your specific board. Thanks, Ben On 9/12/22...
ath10k-ct firmware has not changed much in several years. This would need to be bisected to find what commit caused the problem in order for me to make any progress...
Please attach the firmware crash log.
Please test with this, and I'll likely need the binary crash dump to get the debug out of the core. There is some NPE early in the tx path, maybe...
something like: cat /sys/kernel/debug/ieee80211/phy0/ath10k/fw_crash_dump > /tmp/fw_dump.bin after the crash, and assuming 'phy0' is the radio that crashed. You should get a reasonable sized binary file, or an error if there...
the new one, I added equivalent of 'printk' near the crash site to try to understand it better.
Please re-run with this one, it has more debugging. Only the binary dump is useful for this type of debugging. [firmware-5-htt-mgt-community.bin.gz](https://github.com/greearb/ath10k-ct/files/6468558/firmware-5-htt-mgt-community.bin.gz)
I either gave you the wrong file, or you ran with the old firmware img. Plz double-check, and if you are owrt-devel irc, ping me (greearb)