gr5
gr5
Or if that's too much trouble try turning off geek mode on 2 of the machines. My own pet theory is that geek mode combined with other increased loads on...
I have tinker on 4 UM2 printers. Several different versions of tinker. They all seem to work fine for me.
That's good to know. Good feedback. > Power-cycling is required to recover from the error, as the machine apparently can not detect that it is in an error state. So...
Wow. That sounds like a bug. I've heard the horrible sound but never for more than 3 seconds. The printer is supposed to only move the size of the bed...
@jofleck and @Sisko4 - almost certainly the printer has trouble reaching the end stop. Just move it a tiny bit farther from the edge of the printer. Even just 0.1mm...
The comment about temperature (happens before second print) makes sense. Parts of the printer expand more than other parts with heat. You have a limit switch right on the very...
I have this problem if I set flow rate to anything other than 100%. I think if you set flow rate to a value less than 100% it over extrudes...
If you didn't change flow then I think it's a similar but different bug where Marlin is storing 2 different E values (or some kind of E offset). And one...
Try it. You just get a lot more in the GUI when printing. So for example it shows nozzle temp, fan speed, bed temp, speed, flow and like 5 other...
>Never touched the flow rate to be honest, i never got any problems with extrusion itself. Okay well I still think the bugs are related. When you pause the print...