MangoHud icon indicating copy to clipboard operation
MangoHud copied to clipboard
verified publisher icon flightlessmango

cpu power 0

Open JustCauseWhyNot opened this issue 1 year ago • 4 comments

Describe the bug cpu_power is displaying 0W

List relevant hardware/software information

  • Gentoo
  • 7.1
  • RTX 4070 super
  • R7 7800x3

To Reproduce Steps to reproduce the behavior:

  1. Enable cpu_power
  2. See error

Expected behavior Wattage usage from cpu

Screenshots 2024-05-22_18-05_1

2024-05-22_18-21

JustCauseWhyNot avatar May 23 '24 00:05 JustCauseWhyNot

can you paste the output of sensors ?

flightlessmango avatar May 23 '24 13:05 flightlessmango

Despite zenpower being loaded it doesn't seem to show. I don't know if it's cause I'm using a zen4 cpu or not, but it uses the same kernel socket if my understanding is correct as k10temp which covers zen4.

sensors 
nvme-pci-0d00
Adapter: PCI adapter
Composite:    +26.9°C  (low  =  -0.1°C, high = +82.8°C)
                       (crit = +83.8°C)
Sensor 1:     +19.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +24.9°C  (low  = -273.1°C, high = +65261.8°C)

nct6799-isa-0290
Adapter: ISA adapter
in0:                     1.05 V  (min =  +0.00 V, max =  +1.74 V)
in1:                     1.83 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                     3.42 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                     3.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                     1.67 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                     1.05 V  (min =  +0.00 V, max =  +0.00 V)
in6:                     1.47 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                     3.42 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                     3.25 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                     1.81 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                    1.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                    1.12 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                    1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                  896.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                    1.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in15:                    1.12 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in16:                    1.81 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in17:                  184.00 mV (min =  +0.00 V, max =  +0.00 V)
fan1:                     0 RPM  (min =    0 RPM)
fan2:                  1066 RPM  (min =    0 RPM)
fan3:                     0 RPM  (min =    0 RPM)
fan4:                  1044 RPM  (min =    0 RPM)
fan5:                  1498 RPM  (min =    0 RPM)
fan7:                  1075 RPM  (min =    0 RPM)
SYSTIN:                 +19.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +127.0°C)  sensor = thermistor
CPUTIN:                 +24.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN0:                 +1.0°C  (high = +127.0°C, hyst = +110.0°C)
                                 (crit =  +0.0°C)  sensor = thermistor
AUXTIN1:                +10.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN2:                +19.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN3:                 +7.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +100.0°C)  sensor = thermistor
SMBUSMASTER 0:          +41.5°C  (high = +80.0°C, hyst = +75.0°C)
AUXTIN4:                +23.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)
AUXTIN5:               +113.0°C  
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
TSI0_TEMP:              +41.8°C  
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

JustCauseWhyNot avatar May 24 '24 04:05 JustCauseWhyNot

Despite zenpower being loaded it doesn't seem to show. I don't know if it's cause I'm using a zen4 cpu or not, but it uses the same kernel socket if my understanding is correct as k10temp which covers zen4. sensors

nvme-pci-0d00
Adapter: PCI adapter
Composite:    +26.9°C  (low  =  -0.1°C, high = +82.8°C)
                       (crit = +83.8°C)
Sensor 1:     +19.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +24.9°C  (low  = -273.1°C, high = +65261.8°C)

nct6799-isa-0290
Adapter: ISA adapter
in0:                     1.05 V  (min =  +0.00 V, max =  +1.74 V)
in1:                     1.83 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                     3.42 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                     3.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                     1.67 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                     1.05 V  (min =  +0.00 V, max =  +0.00 V)
in6:                     1.47 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                     3.42 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                     3.25 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                     1.81 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                    1.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                    1.12 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                    1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                  896.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                    1.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in15:                    1.12 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in16:                    1.81 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in17:                  184.00 mV (min =  +0.00 V, max =  +0.00 V)
fan1:                     0 RPM  (min =    0 RPM)
fan2:                  1066 RPM  (min =    0 RPM)
fan3:                     0 RPM  (min =    0 RPM)
fan4:                  1044 RPM  (min =    0 RPM)
fan5:                  1498 RPM  (min =    0 RPM)
fan7:                  1075 RPM  (min =    0 RPM)
SYSTIN:                 +19.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +127.0°C)  sensor = thermistor
CPUTIN:                 +24.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN0:                 +1.0°C  (high = +127.0°C, hyst = +110.0°C)
                                 (crit =  +0.0°C)  sensor = thermistor
AUXTIN1:                +10.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN2:                +19.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN3:                 +7.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +100.0°C)  sensor = thermistor
SMBUSMASTER 0:          +41.5°C  (high = +80.0°C, hyst = +75.0°C)
AUXTIN4:                +23.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)
AUXTIN5:               +113.0°C  
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
TSI0_TEMP:              +41.8°C  
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

use zenergy, not zenpower

Etaash-mathamsetty avatar May 25 '24 22:05 Etaash-mathamsetty

Ok I'll try. I was just using zenergy since there was an already existing ebuild for it.

JustCauseWhyNot avatar May 25 '24 23:05 JustCauseWhyNot

Reopen if this hasn't been resolved

flightlessmango avatar Jul 02 '24 18:07 flightlessmango

I've not tried to resolve. I'll reopen if it fails after I finally install zenergy.

JustCauseWhyNot avatar Jul 02 '24 18:07 JustCauseWhyNot

I couldn't resolve it after using zenstats

JustCauseWhyNot avatar Jan 19 '25 01:01 JustCauseWhyNot