ferbulous

> Also, if possible, I found that the decoded signals of my remote seems to be reversed. Sending the state `ON` would result in the air conditioner **OFF**, and vice...

> Seems like the same issue I reported. The behavior is the same for Panasonic and Sony codes. Having the same problem as well with Sony codes

Hi @nielsnl68 What am I missing to get this working? I keep getting ```Peer not registered: 0xffffffffffff``` error ESP32 sender yaml ``` esphome: name: espnow-esp32-sender friendly_name: espnow-esp32-sender esp32: board: esp32dev...

> > # Example config.yaml > > espnow: > > auto_add_peer: true > > wifi_channel: "1" > > peers: > > # - FF:FF:FF:FF:FF:FF > > - 84:CC:A8:7A:11:10 > >...

> - FF:FF:FF:FF:FF:FF Thanks @jerome83136 Got it working, i thought this was just a random mac address for testing purpose So basically on the receiver, I don't have to specify...

@jerome83136 Is wifi not stable yet? Tried your config with wifi removed and 5 second intervals and it was consistently receiving the payload. With wifi enabled, not so much I'm...

> Could you show more of your yaml script? So i can check what is happening. I have not tested it with wifi + espnow and i do not want...

@tadeastehan Hi, can you share your yaml? I've changed power_save_mode but I'm getting safemode and not sending any espnow. Even though wifi's connected, can't seem to get any logs from...

> Hello, in this [repository](https://github.com/Juzepe1/ESPhome) is transmitter file: `2-transmitter-soil-new-now.yaml` and reciever file: `1-reciever-soil-new-now.yaml`. Hope it helps. Thanks for sharing, so the wifi enabled is on the receiver, have you tried...

> > [#7141 (comment)](https://github.com/esphome/esphome/pull/7141#issuecomment-2422625595) > > @ferbulous Could you please around the log data around ``` this makes the log much better to read. hi, i've edited it