esnet
iperf3: error - unable to send control message: Bad file descriptor
Could we see the complete output from the client (and server if available)?
I also have this problem on Arch Linux:
iperf 3.9 (cJSON 1.7.13) Linux hostname 5.12.6-arch1-1 #1 SMP PREEMPT Sun, 23 May 2021 00:45:50 +0000 x86_64 Optional features available: CPU affinity setting, IPv6 flow label, TCP congestion algorithm setting, sendfile / zerocopy, socket pacing, authentication
However, I have built an AUR git version it does not seems to have this error.
I also have this problem on Arch Linux:
iperf 3.9 (cJSON 1.7.13) Linux hostname 5.12.6-arch1-1 #1 SMP PREEMPT Sun, 23 May 2021 00:45:50 +0000 x86_64 Optional features available: CPU affinity setting, IPv6 flow label, TCP congestion algorithm setting, sendfile / zerocopy, socket pacing, authentication
However, I have built an AUR git version it does not seems to have this error.
Can you provide client and server output showing the issue? Is the server running iperf 3.9 also?
i also have this error
on server:
root@omvnap:~# iperf3 -s -p 5100 -B 192.168.1.246 -V
iperf 3.9
Linux omvnap 6.1.0-0.deb11.13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.55-1~bpo11+1 (2023-10-08) x86_64
-----------------------------------------------------------
Server listening on 5100
-----------------------------------------------------------
on client:
root@bo-omv:~# iperf3 -c **.2.xxx.181 -p 5100 --udp
iperf3: error - unable to send control message: Bad file descriptor
both are version 3.9... only port 5100 udp are open at the server end
Client:
iperf 3.9 (cJSON 1.7.13)
Linux bo-omv 6.1.0-0.deb11.17-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.69-1~bpo11+1 (2024-01-05) x86_64
Optional features available: CPU affinity setting, IPv6 flow label, SCTP, TCP congestion algorithm setting, sendfile / zerocopy, socket pacing, authentication
Server:
iperf 3.9 (cJSON 1.7.13)
Linux omvnap 6.1.0-0.deb11.13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.55-1~bpo11+1 (2023-10-08) x86_64
Optional features available: CPU affinity setting, IPv6 flow label, SCTP, TCP congestion algorithm setting, sendfile / zerocopy, socket pacing, authentication
works fine if i also run the client on same box as the server
root@omvnap:~# iperf3 -c 192.168.1.246 -p 5100 --udp -R
Connecting to host 192.168.1.246, port 5100
Reverse mode, remote host 192.168.1.246 is sending
[ 5] local 192.168.1.246 port 53224 connected to 192.168.1.246 port 5100
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-1.00 sec 160 KBytes 1.31 Mbits/sec 2.119 ms 0/5 (0%)
[ 5] 1.00-2.00 sec 128 KBytes 1.05 Mbits/sec 1.649 ms 0/4 (0%)
[ 5] 2.00-3.00 sec 128 KBytes 1.05 Mbits/sec 1.285 ms 0/4 (0%)
[ 5] 3.00-4.00 sec 128 KBytes 1.05 Mbits/sec 1.005 ms 0/4 (0%)
[ 5] 4.00-5.00 sec 128 KBytes 1.05 Mbits/sec 0.784 ms 0/4 (0%)
[ 5] 5.00-6.00 sec 128 KBytes 1.05 Mbits/sec 0.609 ms 0/4 (0%)
^C[ 5] 6.00-6.15 sec 0.00 Bytes 0.00 bits/sec 0.609 ms 0/0 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-6.15 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%) sender
[ 5] 0.00-6.15 sec 800 KBytes 1.06 Mbits/sec 0.609 ms 0/25 (0%) receiver
iperf3: interrupt - the client has terminated
also works with public servers, so yeah will double check my router settings as something is blocking it
works fine if i also run the client on same box as the server
root@omvnap:~# iperf3 -c 192.168.1.246 -p 5100 --udp -R Connecting to host 192.168.1.246, port 5100 Reverse mode, remote host 192.168.1.246 is sending [ 5] local 192.168.1.246 port 53224 connected to 192.168.1.246 port 5100 [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-1.00 sec 160 KBytes 1.31 Mbits/sec 2.119 ms 0/5 (0%) [ 5] 1.00-2.00 sec 128 KBytes 1.05 Mbits/sec 1.649 ms 0/4 (0%) [ 5] 2.00-3.00 sec 128 KBytes 1.05 Mbits/sec 1.285 ms 0/4 (0%) [ 5] 3.00-4.00 sec 128 KBytes 1.05 Mbits/sec 1.005 ms 0/4 (0%) [ 5] 4.00-5.00 sec 128 KBytes 1.05 Mbits/sec 0.784 ms 0/4 (0%) [ 5] 5.00-6.00 sec 128 KBytes 1.05 Mbits/sec 0.609 ms 0/4 (0%) ^C[ 5] 6.00-6.15 sec 0.00 Bytes 0.00 bits/sec 0.609 ms 0/0 (0%) - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-6.15 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%) sender [ 5] 0.00-6.15 sec 800 KBytes 1.06 Mbits/sec 0.609 ms 0/25 (0%) receiver iperf3: interrupt - the client has terminatedalso works with public servers, so yeah will double check my router settings as something is blocking it
You also need to allow TCP on port 5100 as well for the iperf3 control connection.