Emmanuel

my bad, I did forget that, the problem is on the other side (there is another discussion here) where we can't match both except under certain conditons where we already...

can you see if your match the criteria ?

that could be a possibility yes

installation: sudo npm install pm2 -g pm2 start /usr/share/mydomoathome/lib/mdah.js sudo env PATH=$PATH:/usr/local/bin pm2 startup -u www-data pm2 save update/remove: pm2 stop all status: pm2 list

pm2 start mdah.js -i 0 --name "MDAH" pm2 restart MDAH pm2 stop MDAH

strange possibility in some domoticz to have multiswitch by something else than 10 increment...

"SubType" : "Zone" "Status" : "Auto", "Data" : "0.0 C, (0.0 C), Auto", "SetPoint" : 0.0, curl 'http://192.168.0.28:8080/json.htm?type=setused&idx=461&name=Evohome%20Z&description=toto&setpoint=10&mode=PermanentOverride&until=&used=true' curl 'http://192.168.0.28:8080/json.htm?type=setused&idx=461&name=Evohome%20Z&description=toto&setpoint=10&mode=TemporaryOverride&until=2016-03-23T14:45:00.000Z&used=true' curl 'http://192.168.0.28:8080/json.htm?type=setused&idx=461&name=Evohome%20Z&description=toto&addjvalue=5&used=true'

"SubType" : "Hot Water", "Status" : "Auto", "State" : "Off", "Data" : "0.0 C, Off, Auto", curl 'http://192.168.0.28:8080/json.htm?type=setused&idx=462&name=Evohome%20H&description=titi&state=On&mode=PermanentOverride&until=&used=true' curl 'http://192.168.0.28:8080/json.htm?type=setused&idx=462&name=Evohome%20H&description=titi&state=On&mode=TemporaryOverride&until=2016-03-23T12:32:00.000Z&used=true' ~

One thing I noticed the other day with the evohome, I set it to "Economy" mode. That changed the "Mode" on all my temperatures for evohome to "Economy". Mode away...

Proposal for a mapping from existing: - no temporary override as no input possible in Imperihome Zone Temp / SetPoint => 1 device for Temp => 1 device for Thermostat...