RaspberryNtpServer
RaspberryNtpServer copied to clipboard
domschl
Stratum-1 time server with Raspberry Pi and GPS
Thank you very much for providing this setup! I have been running two Raspberry Pi 4 NTP server for a long time. When upgrading to Raspberry Pi 5, I did...
With a recent update to Raspbian, it's necessary to add `arm_64bit=0` to /boot/config.txt and reboot in order to get the pps working
I've gotten everything working with Chrony, etc. My question is - how can I be notified when something goes wrong? I.e., the PPS source is unreliable, GPS lock has been...
Hello. I had set up two separate servers for both the office and home. I did some operations on one of them, such as setting up a VPN server etc.,...
Hi, I'm fairly certain the Adafruit modules (or any Mediatek MTK3339 based modules) are a poor choice for clock applications. The timing of the NMEA output relative to the PPS...
Hi, I know you recommend a Pi 4/5 but I tried this out on a Pi Zero W and did manage to get stratum 1 with it, which is cool....
Anybody got this "gpsd[748]: gpsd:ERROR: accept: fail: Too many open files in system" error before?
I have been encountering this error recently, and the log generated by this error has unexpectedly expanded my syslog and user.log to 10GB (almost filling up my SD card). Does...
I just finished installing RaspberryNtpServer on a Raspberry PI 4. The s/w and GPS are working fine and chrony is synched and running. I just added a 4 line lcd...
When configured with DHCP and added to a network I found it helpful to know what the IP address is. This update alternates showing the IP address of the device...
