The tiny10 can boot successfully, but it cannot running for a long time

[goxofy]

windows  | ❯ Starting Windows for Docker v2.07...
winiso   | /docker-entrypoint.sh: /docker-entrypoint.d/ is not empty, will attempt to perform configuration
windows  | ❯ For support visit https://github.com/dockur/windows
windows  |
winiso   | /docker-entrypoint.sh: Looking for shell scripts in /docker-entrypoint.d/
winiso   | /docker-entrypoint.sh: Launching /docker-entrypoint.d/10-listen-on-ipv6-by-default.sh
windows  | ❯ Booting Windows using QEMU emulator version 8.2.1 ...
windows  |
BdsDxe: loading Boot0003 "Windows Boot Manager" from HD(1,GPT,6B367048-7ACD-45D8-94F1-D1ABD4E1162E,0x800,0x40000)/\EFI\Microsoft\Boot\bootmgfw.efi
winiso   | 10-listen-on-ipv6-by-default.sh: info: Getting the checksum of /etc/nginx/conf.d/default.conf
windows  | BdsDxe: starting Boot0003 "Windows Boot Manager" from HD(1,GPT,6B367048-7ACD-45D8-94F1-D1ABD4E1162E,0x800,0x40000)/\EFI\Microsoft\Boot\bootmgfw.efi
windows  | KVM: entry failed, hardware error 0x80000021
windows  |
windows  | If you're running a guest on an Intel machine without unrestricted mode
windows  | support, the failure can be most likely due to the guest entering an invalid
windows  | state for Intel VT. For example, the guest maybe running in big real mode
windows  | which is not supported on less recent Intel processors.
windows  |
windows  | EAX=003bc5a8 EBX=5c0004aa ECX=4000d858 EDX=00000608
windows  | ESI=ff9087a0 EDI=4000d700 EBP=00000000 ESP=234746e8
winiso   | 10-listen-on-ipv6-by-default.sh: info: Enabled listen on IPv6 in /etc/nginx/conf.d/default.conf
windows  | EIP=00008000 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=1 HLT=0
winiso   | /docker-entrypoint.sh: Sourcing /docker-entrypoint.d/15-local-resolvers.envsh
windows  | ES =0000 00000000 ffffffff 00809300
winiso   | /docker-entrypoint.sh: Launching /docker-entrypoint.d/20-envsubst-on-templates.sh
windows  | CS =a000 7ffa0000 ffffffff 00809300
winiso   | /docker-entrypoint.sh: Launching /docker-entrypoint.d/30-tune-worker-processes.sh
windows  | SS =0000 00000000 ffffffff 00809300
winiso   | /docker-entrypoint.sh: Configuration complete; ready for start up
windows  | DS =0000 00000000 ffffffff 00809300
winiso   | 2024/03/16 09:39:34 [notice] 1#1: using the "epoll" event method
windows  | FS =0000 00000000 ffffffff 00809300
winiso   | 2024/03/16 09:39:34 [notice] 1#1: nginx/1.25.4
windows  | GS =0000 00000000 ffffffff 00809300
winiso   | 2024/03/16 09:39:34 [notice] 1#1: built by gcc 12.2.1 20220924 (Alpine 12.2.1_git20220924-r10)
windows  | LDT=0000 00000000 000fffff 00000000
winiso   | 2024/03/16 09:39:34 [notice] 1#1: OS: Linux 4.4.0-210-generic
windows  | TR =0040 23469000 00000067 00008b00
windows  | GDT=     2346afb0 00000057
windows  | IDT=     00000000 00000000
winiso   | 2024/03/16 09:39:34 [notice] 1#1: getrlimit(RLIMIT_NOFILE): 1048576:1048576
winiso   | 2024/03/16 09:39:34 [notice] 1#1: start worker processes
winiso   | 2024/03/16 09:39:34 [notice] 1#1: start worker process 30
winiso   | 2024/03/16 09:39:34 [notice] 1#1: start worker process 31
windows  | CR0=00050032 CR2=7953b000 CR3=001ad002 CR4=00000000
windows  | DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
windows  | DR6=00000000ffff0ff0 DR7=0000000000000400
windows  | EFER=0000000000000000
windows  | Code=qemu-system-x86_64: hw/core/cpu-sysemu.c:76: cpu_asidx_from_attrs: Assertion `ret < cpu->num_ases && ret >= 0' failed.
windows  | ❯ ERROR: Forcefully terminating Windows, reason: 0...
windows  | ❯ Shutdown completed!

Here are logs.

[kroese]

Looks like some problem with your CPU. Try with this added in your compose file:

environment:
  HV: "N"
  BOOT_MODE: "windows_plain"

[goxofy]

Thanks. I'll try this

[goxofy]

It seems like if I keep the RDP connected, the system won't crash, but if I disconnect the RDP, the system will crash after some minutes or hours.