BTWifiModule
BTWifiModule copied to clipboard
dlktdr
Open/EdgeTX Compatible Bluetooth Module
Persist the device name coming from the AT+NAME command from the TX. Use that name to set up the BT device name. Helps debug what is around you with a...
Is file access part of the radio firmware update part? I want to access a csv a widget/lua script is writing via bluetooth. Happy to help code it if pointed...
c3 Zero
When using the ESPHome-Flasher everything seems to work and then I get an "invalid header" Using 'COM4' as serial port. Connecting... Detecting chip type... ESP32-C3 Connecting... Chip Info: - Chip...
Aloha! I've managed to compile the firmware using @Thetruesaint solution, uploaded it and connected ESP to my Radiomaster Boxer. Bluetooth seems to be recognised since I can see local address...
I was able to successfully complete the flashing without errors. The module shows up in my TX16S MKII radio running on EdgeTX built with Bluetooth enabled and the address reports...
Good morning, I have some esp32 modules to test but the allure of the ESP01S form factor is just too much. Would it be possible to port this to an...
Modifications to use packets over AT commands. This was created due to the limitations of AT commands. There is a need for the ESP to send/receive from multiple modules, e.g....
If you discover, click a bluetooth address that doesn't allow a connection and then click discover again before waiting a while it will crash the Bluetooth on the board. ```...
You can use this firmware to wirelessly use your radio as a joystick device. To use with the a OTX / ETX radio you must have Bluetooth enabled in the...