Dmitry Ermakov
Dmitry Ermakov
We've tested 18ev200 with same spi flash and it works even without patching...maybe it's a hardware fault ?
I can suggest booting from NFS, then you will be able to experiment
kernel from tftp, rootfs on nfs. check bootnfs cmd in uboot
[uImage.zip](https://github.com/OpenIPC/firmware/files/10884324/uImage.zip)
[uImage.zip](https://github.com/OpenIPC/firmware/files/10885621/uImage.zip)
[uImage.zip](https://github.com/OpenIPC/firmware/files/10885985/uImage.zip)
In uboot `setenv extras "hisi_mci.disabled=1";saveenv` [uImage.zip](https://github.com/OpenIPC/firmware/files/10887501/uImage.zip)
It's not similar with anything else, because we are 100% sure this flash works on 18ev200. In your case there are some probs with board schematics, I've tried everything i...
This is some heavily modded firmware. First try flashing it to SPI, following the manual. Running from RAM assumes some deep knowledge of internals and i think it just wont...
Theres a windows app for that. [pctools.tar.gz](https://github.com/OpenIPC/firmware/files/11329310/pctools.tar.gz)