SwitchBot-MQTT-BLE-ESP32 icon indicating copy to clipboard operation
SwitchBot-MQTT-BLE-ESP32 copied to clipboard
verified publisher icon devWaves

Hardware Test - ESP32-S3

Open Chaaaaaaaaarlie opened this issue 2 years ago • 1 comments

ESP32-S3 confirmed not working. I guess due to small RAM.

ESP-ROM:esp32s3-20210327 Build:Mar 27 2021 rst:0x3 (RTC_SW_SYS_RST),boot:0x2a (SPI_FAST_FLASH_BOOT) Saved PC:0x403cdac2 SPIWP:0xee

Writing at 0x000fc39b... (84 %)

A serial exception error occurred: Cannot configure port, something went wrong. Original message: PermissionError(13, 'The device does not recognize the command.', None, 22) Note: This error originates from pySerial. It is likely not a problem with esptool, but with the hardware connection or drivers. For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html Failed uploading: uploading error: exit status 1

Chaaaaaaaaarlie avatar Nov 07 '23 15:11 Chaaaaaaaaarlie

hi,

I loaded it in a ESP32-S3-DevKitC-1-N16R8V this morning. No problem aside the uart driver than needed to be installed. It is now connected to a Curtain 3 and working properly

DrFatalis avatar Jan 26 '24 13:01 DrFatalis