Failed to connect to AC after discovery via mqtt

[georgebancila]

Hello, I configured the add-on correctly. My ac is discovered, it found the IP address, the ip key and key id. But after that it only says E0628 12:22:00.556 notifier.py:121] Failed to connect to 192.168.1.213, maybe it is offline?

If I ping that ip address it work ok. I removed the config for hisense, it found the AC again but it still doesn't work

Any ideas?

[nlarenti]

Also for me the same problem. The problem is solved temporarily (a few hours / day) by cutting off the power to the air conditioner, and then reappearing. By scanning the ports, the devices are found on port 80.

[revoluta]

Hello, i have the same problem, It has been working correctly for a long time but since yesterday it gives me the same error message, I have rebooted, but the problem remains

[nlarenti]

If you are interested, I notice that all the wifi cards of my 4 air conditioners have door 80 closed.

[georgebancila]

For some reason it works for a few days now, I did nothing to it..

[giros79]

just have a look to the hisense folder. Should have 1 file for each AC. Have a look to IP address and assign the same to the router (or change in the .json and assign the one from the router) Let me know if it works