[HW2] Inquiry/Pair mode always active when no controllers are connected.

[rutdarkronin]

Answers checklist.

• [x] I have read and will follow the terms above.
• [x] I have read the documentation BlueRetro wiki and the issue is not addressed there.
• [x] I have updated my BlueRetro to latest version available.
• [x] I have searched the issue tracker for a similar issue and not found a similar issue.

BlueRetro firmware version

25.04

BlueRetro firmware specification

HW2

BlueRetro firmware variant

System specific

BlueRetro hardware type

Internal install DIY

Manufacturer

ESP32

System used

Sony PlayStation 1

Bluetooth controller brand & name

DualSense

What is the problem? (only list ONE problem per report)

For some reason, inquiry mode is always active when there's no active controller connection, even though it is set to Manual mode in advanced config section. Thus, whenever you choose to play with your wired controller a pulsing Blueretro global status LED will always draw attention.

What did you expect to happen?

Inquiry mode in manual mode is inactive until boot/reset button are held for 3+ seconds. System status LED is off.

Attach BlueRetro debug trace here

No response

[rutdarkronin]

Found another one with exact same behaviour - https://github.com/darthcloud/BlueRetro/issues/1213 Sorry for bumping up, feel free to close this one as it's basically the same bug.

[darthcloud]

Yes, dup of #1213