KZones

KDE KWin Script for snapping windows into zones. Handy when using a (super) ultrawide monitor.
An alternative to PowerToys FancyZones.

Features

Drag & Drop

Dragging windows to a zone

Multiple Layouts

Create multiple layouts and cycle between them

Shortcuts

Snap windows using shortcuts (full list below)

Installation

Install via KDE Store or clone this repo and run the ./build script.

KDE Store

Under System Settings / KWin Scripts / Get New Scripts, search for KZones and install it.
https://store.kde.org/p/1909220

Build it yourself

Make sure you have "zip" installed on your system before building.

git clone https://github.com/gerritdevriese/kzones
cd kzones && ./build

Setup

Layouts

You can define layouts by putting them in the Layouts tab in the script settings, here are some examples to get you started:

Examples

[
    {
        "name": "Layout 1",
        "padding": 10,
        "zones": [
            {
                "name": "1",
                "x": 0,
                "y": 0,
                "height": 100,
                "width": 25
            },
            {
                "name": "2",
                "x": 25,
                "y": 0,
                "height": 100,
                "width": 50
            },
            {
                "name": "3",
                "x": 75,
                "y": 0,
                "height": 100,
                "width": 25
            }
        ]
    }
]

[
    {
        "name": "Layout 1",
        "padding": 0,
        "zones": [
            {
                "name": "1",
                "x": 0,
                "y": 0,
                "height": 100,
                "width": 25
            },
            {
                "name": "2",
                "x": 25,
                "y": 0,
                "height": 100,
                "width": 50
            },
            {
                "name": "3",
                "x": 75,
                "y": 0,
                "height": 100,
                "width": 25
            }
        ]
    },
    {
        "name": "Layout 2",
        "padding": 0,
        "zones": [
            {
                "name": "1",
                "x": 0,
                "y": 0,
                "height": 50,
                "width": 25
            },
            {
                "name": "2",
                "x": 0,
                "y": 50,
                "height": 50,
                "width": 25
            },
            {
                "name": "3",
                "x": 25,
                "y": 0,
                "height": 100,
                "width": 50
            },
            {
                "name": "4",
                "x": 75,
                "y": 0,
                "height": 50,
                "width": 25
            },
            {
                "name": "5",
                "x": 75,
                "y": 50,
                "height": 50,
                "width": 25
            }
        ]
    }
]

Explanation

The main array can contain as many layouts as you want:

Each layout object needs the following keys:

• name: The name of the layout, shown in the OSD when cycling between layouts
• padding: The amount of space between the window and the zone in pixels
• zones: An array containing all zone objects for this layout

Each zone object needs the following keys:

• name: The name of the zone, shown inside the zone indicator (can be left blank)
• x, y: position of the top left corner of the zone in screen percentage
• width, height: size of the zone in screen percentage

Indicator offset

If for some reason you want to move the zone indicator, you can do so by adding the following keys to a zone object:

{
    "name": "2",
    "x": 25,
    "y": 0,
    "height": 100,
    "width": 50,
    "indicator": {
        "offset": {
            "x": 100,
            "y": -50
        }
    }
}

This example will move the indicator 100 pixels to the right and 50 pixels up.

Other settings

Determine zone

Target

The Target can be set to Indicator or Zone. Indicator is the default and will snap the window to the zone if the chosen method is inside the zone indicator. Choose Zone if you want to always snap the window to the zone it's dropped in. (you can cancel the snap with the "Toggle OSD" shortcut)

Method

By default the script will use the Titlebar method to determine which zone a window should snap to. This means that the window will snap when the target contains the titlebar of the window. You can change this behaviour by setting the method to Cursor or Window. (mind the caveats below)

Size

Change the size of the chosen method, for example when using the Titlebar method you can decrease the size of the "handle" to make it easier to snap windows to the correct zone. You can temporarily enable debug mode to see the exact size of the "handle".

Filtering

You can block certain windows from snapping by adding their class name to the exclude list. Or you can only allow certain windows to snap by adding their class name to the include list. You can find the class name of a window by running xprop in a terminal and clicking on the window. The class name will be in the WM_CLASS property.

Polling rate

The polling rate is the amount of time between each zone check when dragging a window. The default is 100ms, a faster polling rate is more accurate but will use more CPU. You can change this to your liking.

Inverted mode

When enabled, moving windows will not trigger the osd. Instead you'll have to use the "Toggle OSD" shortcut to show the osd.

Shortcuts

List of all available shortcuts:

To change the default bindings, go to System Settings / Shortcuts and search for KZones

Troubleshooting

The script doesn't work

• Check if your KDE version is up to date.
• Make sure there is at least one layout defined in the script settings and that it contains at least one zone.

My settings are not saved

• After changing settings, you need to reload the script by disabling, saving and enabling it again. (or by restarting KWin)

Caveats

When selecting Cursor as the "determine zone method" you have to be on X11. If you're using Wayland you'll need to use the Titlebar or Window method instead.