David Bender
David Bender
You could take a stab at writing a CUSE driver
This is really cool, thanks! If I weren't so busy with other projects I would make a different i2cdriver device that wasn't written in (colorforth?) Does this have a configurable...
The SCL runs at max 25 KHz.
I will order you an MSP430 launchpad if you want. The way the jumpers work you can select between the onboard programmer and your RPI gpio. I am sure the...
I am getting almost identical output for the MSP430FR5739....is the FR family supported by JTAG?
OK thanks. My target processors are the FR2422 and the FR5739 so I am not sure if the GreatFET would work with those.
I did some tests on my own with 3 different versions u-boot Setup: Custom board with Carambola2-I with another microprocessor toggling Carambola reset line A script would run on the...
Updated u-boot_mod to latest and confirmed that I was having reset line issues. I think this fix should be in u-boot_mod as well
@pepe2k I have looked at porting their changes over but I think there is some deep domain knowledge, as well as JTAG access to the Carambola needed to do this...
Hi Piotr, I am having a hard time reproducing them, but some of the details are in this issue: https://github.com/8devices/Caraboot/issues/5 I am confused by mantas-p's comment: "Is not the DDR...