ciromattia
Membrane keyboad not debounced
I have this setup and the hardware all seems to work but I cannot enter single digit times - Whenever i touch a key I get 11.1 or 33.3 or 66.6 etc. I read some bits about debouncing keys to allow a 250ms delay but I am not skliled enough to implement this. I am a novice to this but see in your code there is a "TODO: add event listener for keypad" Is this what is required or is there another later .ino which fixes this. Many thanks. Alan
The Timerino was evolved and the github project is out of date.
If you send me your email address i send new code and hardware setup.
@.***
Il giorno gio 26 gen 2023 alle ore 16:32 alanbradford < @.***> ha scritto:
I have this setup and the hardware all seems to work but I cannot enter single digit times - Whenever i touch a key I get 11.1 or 33.3 or 66.6 etc. I read some bits about debouncing keys to allow a 250ms delay but I am not skliled enough to implement this. I am a novice to this but see in your code there is a "TODO: add event listener for keypad" Is this what is required or is there another later .ino which fixes this. Many thanks. Alan
— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ557HKSFXDPH5ARDUEG5DWUKKIXANCNFSM6AAAAAAUHUKZQ4 . You are receiving this because you are subscribed to this thread.Message ID: @.***>
@.***
Thanks!
Alan Bradford
On 26 Jan 2023, at 17:04, DanieleLucarelli @.***> wrote:
The Timerino was evolved and the github project is out of date.
If you send me your email address i send new code and hardware setup.
@.***
Il giorno gio 26 gen 2023 alle ore 16:32 alanbradford < @.***> ha scritto:
I have this setup and the hardware all seems to work but I cannot enter single digit times - Whenever i touch a key I get 11.1 or 33.3 or 66.6 etc. I read some bits about debouncing keys to allow a 250ms delay but I am not skliled enough to implement this. I am a novice to this but see in your code there is a "TODO: add event listener for keypad" Is this what is required or is there another later .ino which fixes this. Many thanks. Alan
— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ557HKSFXDPH5ARDUEG5DWUKKIXANCNFSM6AAAAAAUHUKZQ4 . You are receiving this because you are subscribed to this thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.
Mail address is not visible i wrote my in vertical l d a n i v v e r o @ g m a i l . c o m
Il giorno gio 26 gen 2023 alle ore 17:50 alanbradford < @.***> ha scritto:
@.***
Thanks!
Alan Bradford
On 26 Jan 2023, at 17:04, DanieleLucarelli @.***> wrote:
The Timerino was evolved and the github project is out of date.
If you send me your email address i send new code and hardware setup.
@.***
Il giorno gio 26 gen 2023 alle ore 16:32 alanbradford < @.***> ha scritto:
I have this setup and the hardware all seems to work but I cannot enter single digit times - Whenever i touch a key I get 11.1 or 33.3 or 66.6 etc. I read some bits about debouncing keys to allow a 250ms delay but I am not skliled enough to implement this. I am a novice to this but see in your code there is a "TODO: add event listener for keypad" Is this what is required or is there another later .ino which fixes this. Many thanks. Alan
— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3, or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABJ557HKSFXDPH5ARDUEG5DWUKKIXANCNFSM6AAAAAAUHUKZQ4
. You are receiving this because you are subscribed to this thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.
— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3#issuecomment-1405299245, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ557BLNGGGQ2IXDHA6YQLWUKTMTANCNFSM6AAAAAAUHUKZQ4 . You are receiving this because you commented.Message ID: @.***>
Hi, i saw that Timerino is evolved to ver. 3.01 with the work of Alessio Bortoletto.
Here: https://alessiobortoletto.wixsite.com/alessiobortoletto/projects-2 you find everything.
Il giorno gio 26 gen 2023 alle ore 17:34 alanbradford < @.***> ha scritto:
Thanks! @.***
— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3#issuecomment-1405276873, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ557FA3P72JDW3D4TZMMDWUKRP3ANCNFSM6AAAAAAUHUKZQ4 . You are receiving this because you commented.Message ID: @.***>
Thanks you very much!
Alan Bradford @.***
On 27 Jan 2023, at 10:29, DanieleLucarelli @.***> wrote:
Hi, i saw that Timerino is evolved to ver. 3.01 with the work of Alessio Bortoletto.
Here: https://alessiobortoletto.wixsite.com/alessiobortoletto/projects-2 you find everything.
Il giorno gio 26 gen 2023 alle ore 17:34 alanbradford < @.***> ha scritto:
Thanks! @.***
— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3#issuecomment-1405276873, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ557FA3P72JDW3D4TZMMDWUKRP3ANCNFSM6AAAAAAUHUKZQ4 . You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3#issuecomment-1406243036, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5PMZBJYO5CAWBWBRGOWHXDWUOIO3ANCNFSM6AAAAAAUHUKZQ4. You are receiving this because you authored the thread.