MicroCeph fails on machine with device mapper multipathing

[fnordahl]

Issue report

What version of MicroCeph are you using ?

$ snap info microceph
...
installed:          18.2.0+snapcba31e8c75                 (999) 87MB -

What are the steps to reproduce this issue ?

Using the following script to create LXD VMs:

set -x
n=0

for node in micro-1 micro-2 micro-3; do
    n=$(( n + 1 ))
    lxc stop microcloud:sunbeam-$n || true
    lxc delete microcloud:sunbeam-$n || true
    lxc storage volume delete microcloud:default sunbeam-$n-disk-2 || true
    lxc storage volume delete microcloud:default sunbeam-$n-disk-3 || true
    lxc storage volume delete microcloud:default sunbeam-$n-disk-4 || true

    lxc launch ubuntu:jammy microcloud:sunbeam-$n \
        --vm \
        -c limits.cpu=16 \
        -c limits.memory=32GiB \
        --target $node
    lxc storage volume create microcloud:default \
        sunbeam-$n-disk-2 size=100GiB --type=block --target=$node
    lxc storage volume create microcloud:default \
        sunbeam-$n-disk-3 size=100GiB --type=block --target=$node
    lxc storage volume create microcloud:default \
        sunbeam-$n-disk-4 size=100GiB --type=block --target=$node

    lxc config device add microcloud:sunbeam-$n eth1 nic network=internal
    lxc config device add microcloud:sunbeam-$n \
        sunbeam-$n-disk-2 disk pool=default source=sunbeam-$n-disk-2
    lxc config device add microcloud:sunbeam-$n \
        sunbeam-$n-disk-3 disk pool=default source=sunbeam-$n-disk-3
    lxc config device add microcloud:sunbeam-$n \
        sunbeam-$n-disk-4 disk pool=default source=sunbeam-$n-disk-4
done

What happens (observed behaviour) ?

$ lsblk
NAME     MAJ:MIN RM  SIZE RO TYPE  MOUNTPOINTS
loop0      7:0    0 63.9M  1 loop  /snap/core20/2318
loop1      7:1    0 38.8M  1 loop  /snap/snapd/21759
loop2      7:2    0   87M  1 loop  /snap/lxd/28373
sda        8:0    0  100G  0 disk  
├─sda1     8:1    0 99.9G  0 part  /
├─sda14    8:14   0    4M  0 part  
└─sda15    8:15   0  106M  0 part  /boot/efi
sdb        8:16   0  100G  0 disk  
└─mpatha 253:0    0  100G  0 mpath 
sdc        8:32   0  100G  0 disk  
└─mpatha 253:0    0  100G  0 mpath 
sdd        8:48   0  100G  0 disk  
└─mpatha 253:0    0  100G  0 mpath 

$ sudo microceph disk list

Available unpartitioned disks on this system:
+---------------+-----------+------+------------------------------------------------------------------+
|     MODEL     | CAPACITY  | TYPE |                               PATH                               |
+---------------+-----------+------+------------------------------------------------------------------+
| QEMU HARDDISK | 100.00GiB | scsi | /dev/disk/by-id/scsi-SQEMU_QEMU_HARDDISK_lxd_sunbeam--1--disk--2 |
+---------------+-----------+------+------------------------------------------------------------------+
| QEMU HARDDISK | 100.00GiB | scsi | /dev/disk/by-id/scsi-SQEMU_QEMU_HARDDISK_lxd_sunbeam--1--disk--3 |
+---------------+-----------+------+------------------------------------------------------------------+
| QEMU HARDDISK | 100.00GiB | scsi | /dev/disk/by-id/scsi-SQEMU_QEMU_HARDDISK_lxd_sunbeam--1--disk--4 |
+---------------+-----------+------+------------------------------------------------------------------+

$ sudo microceph disk add /dev/disk/by-id/scsi-SQEMU_QEMU_HARDDISK_lxd_sunbeam--1--disk--2

+------------------------------------------------------------------+---------+
|                               PATH                               | STATUS  |
+------------------------------------------------------------------+---------+
| /dev/disk/by-id/scsi-SQEMU_QEMU_HARDDISK_lxd_sunbeam--1--disk--2 | Failure |
+------------------------------------------------------------------+---------+
Error: failed to bootstrap OSD: Failed to run: ceph-osd --mkfs --no-mon-config -i 1: exit status 250 (2024-07-02T09:34:17.422+0000 7f2e824d58c0 -1 bluestore(/var/lib/ceph/osd/ceph-1/block) _read_bdev_label unable to decode label at offset 102: void bluestore_bdev_label_t::decode(ceph::buffer::v15_2_0::list::const_iterator&) decode past end of struct encoding: Malformed input
2024-07-02T09:34:17.422+0000 7f2e824d58c0 -1 bluestore(/var/lib/ceph/osd/ceph-1/block) _read_bdev_label unable to decode label at offset 102: void bluestore_bdev_label_t::decode(ceph::buffer::v15_2_0::list::const_iterator&) decode past end of struct encoding: Malformed input
2024-07-02T09:34:17.422+0000 7f2e824d58c0 -1 bluestore(/var/lib/ceph/osd/ceph-1/block) _read_bdev_label unable to decode label at offset 102: void bluestore_bdev_label_t::decode(ceph::buffer::v15_2_0::list::const_iterator&) decode past end of struct encoding: Malformed input
2024-07-02T09:34:17.450+0000 7f2e824d58c0 -1 bdev(0x55735efae000 /var/lib/ceph/osd/ceph-1/block) open open got: (16) Device or resource busy
2024-07-02T09:34:17.450+0000 7f2e824d58c0 -1 bluestore(/var/lib/ceph/osd/ceph-1) mkfs failed, (16) Device or resource busy
2024-07-02T09:34:17.450+0000 7f2e824d58c0 -1 OSD::mkfs: ObjectStore::mkfs failed with error (16) Device or resource busy
2024-07-02T09:34:17.450+0000 7f2e824d58c0 -1  ** ERROR: error creating empty object store in /var/lib/ceph/osd/ceph-1: (16) Device or resource busy)

What were you expecting to happen ?

Successful addition of disk.

Relevant logs, error output, etc.

See above.

Additional comments.

Disabling multipath with sudo multipath -F allows disks to be added.

[sabaini]

Hi @fnordahl I've seen this as well in lxd vms that automatically start multipathd.

I'm a bit hesitant on automatically resetting multipath sudo multipath -F -- if user had multipath devices they cared about that would impact them I believe?

[fnordahl]

Yes, i was not suggesting to unconditionally disable it, but we could either make it work (if that is even possible) or detect the situation and tell the user what to do?

[sabaini]

Ack, good point wrt. to detecting the situation :+1: we should have useful feedback in this situation