Uart not Working

Open pettard opened this issue 3 years ago • 8 comments

Hi, Uart is not possible to get working with the latest image. Is there anyway to get this working again?

Oct 26 '22 18:10 pettard

UART is working correctly. Recheck if its connected correctly and your SDcard is plugged in.

Nov 15 '22 10:11 Haxk20

I have trouble setting it up as well...

Jul 23 '23 04:07 Avasty

In the BoardENV.txt file change "console=display" to "console=serial" and use "/dev/ttyS0" instead of "/dev/ttyAMA0"

Jul 23 '23 07:07 Pneumanifest

That's what i have...

Jul 23 '23 11:07 Avasty

Exactly as you written, connected VIA 5 pins on board between BigTreeTech Pi V1.2 and BTT Pico V1.0 and still cannot connect to board

Jul 23 '23 11:07 Avasty

I think that problem might be somewhere else... https://pastebin.com/0xFdvyst here's klippy.log if you want to give it a try

Jul 23 '23 13:07 Avasty

It's showing a connection time out, so no response. Have you tried swapping Rx and tx on one side?

Jul 23 '23 20:07 Pneumanifest

Yes i did

Jul 24 '23 04:07 Avasty