===================================================================== How to prepare your host machine to build boxee and CE4100 SDK

Install Ubuntu Desktop.

sudo apt-get install wget patch flex bison gettext libtool autoconf cmake nasm gperf g++ gawk doxygen swig libsdl-image1.2-dev liblzo2-dev php5-cli

If you are using Ubuntu 9.10 or earlier:

sudo apt-get install python2.4-minimal

If you are using Ubuntu 10.04 32 bit or newer:

cd /tmp

wget http://mirrors.kernel.org/ubuntu/pool/main/p/python2.4/python2.4-minimal_2.4.6-1ubuntu3.2.9.10.1_i386.deb

sudo dpkg --install python2.4*deb

If you are using Ubuntu 10.04 64 bit or newer:

cd /tmp

wget http://mirrors.kernel.org/ubuntu/pool/main/p/python2.4/python2.4-minimal_2.4.6-1ubuntu3.2.9.10.1_amd64.deb

sudo dpkg --install python2.4*deb

===================================================================== How to build the CE4100 SDK

sudo mkdir /mnt/iso

Go to intel's site, under Intel Media Processor 3100 Download the tar.gz and extract it. This will create a bunch of ISO files.

For each file (start with BASE):

sudo mount -t iso9660 -o loop,ro .iso /mnt/iso

cd /mnt/iso

bash installer

cd ..

sudo umount /mnt/iso

This extracted everything to $HOME/IntelCE-

cd $HOME/IntelCE-

make menuconfig

sudo make

Wait a few hours...

Then, setup NFS, DHCP, TFTP, etc according to the Intel docs

===================================================================== Setup CE4100 box

1. During boot hit CTRL-C to enter RedBoot console
2. Type: fconfig and hit enter

load -v -r -m tftp -h 10.5.0.1 -b 0x200000 bzImage.pr13.11 exec -b 0x200000 -l 0x300000 -c "console=ttyS0,115200 root=/dev/nfs nfsroot=10.5.0.1:/home/yuvalt/IntelCE-13.94515/project_build_i686/IntelCE/root,nolock rw mem=exactmap memmap=1M@0 memmap=639M@1M ip=dhcp"

Hit enter until the end. Last question answer "y".

===================================================================== Boxee specific environment

sudo mkdir /opt/canmore

sudo ln -s $HOME/IntelCE-/build_i686/staging_dir /opt/canmore/IntelCE

sudo ln -s $HOME/IntelCE-/build_i686/staging_dir/bin /opt/canmore/toolchains

sudo ln -s $HOME/IntelCE-/project_build_i686/IntelCE/root /opt/canmore/targetfs

sudo ln -s $HOME/IntelCE- /opt/canmore/sdk

cd /opt/canmore

sudo tar xvfJ $(SRC)/canmore/local.tar.xz

Add /opt/canmore/toolcahin to PATH in ~/.bash_profile Try to run i686-cm-linux-gcc.

Remote the config.h from Intel SDK as it's causing Boxee build problems:

cd /opt/canmore/IntelCE/include

mv config.h config.h.orig

Add "DisableHWTextureUpload=1" in /etc/powervr.ini .

edit /etc/platform_config/ce4100/platform_config.hcfg: media_base_address = 0x28000000 //640M

===================================================================== Building debug/non-optimized version

./bootstrap autoconf

for debug build do the following:

./canmore/configure.sh -d

for optimized build do the following:

./canmore/configure.sh make Boxee for 32-bit: make -C tools/TexturePacker -f Makefile.host for 64-bit: make -C tools/TexturePacker -f Makefile.host64 make -C skin/boxee/media nocompress

===================================================================== Installation

Copy the 3rd party libraries to the target filesystem. This needs to be done once whenever the targetfs-addons.tar.xz changes:

mkdir /opt/canmore/targetfs/opt/local

cd /opt/canmore/targetfs/opt/local

tar xvfj $(SRC)/canmore/targetfs-local.tar.xz

The following copies all the required files to /opt/canmore/targetfs/opt/boxee:

./canmore/install_full.sh

===================================================================== Run Boxee

From the CE4100 console:

/opt/boxee/run_boxee.sh

Getting to a console if your box launches straight into boxee:

Get the IP of the box from network status. telnet into that IP. Kill the run_boxee and Boxee processes (in that order) and the console should now be 'live'.

Stopping boxee from launching automatically at boot:

After doing the above, remove the /etc/rc3.d boxee script. This will boot you to console instead of to boxee.

Running boxee from your developer working copy:

The easy method is to get to the console on your boxee box, mount the working directory you use via nfs, and launch boxee from there. On the boxee console: mkdir /mnt/work mount -t nfs <dev_machine_ip>:/opt/canmore/targetfs/opt/boxee /mnt/work -o nolock

===================================================================== 3rd Parties

Libraries:

zlib (http://www.zlib.net/) zzip (http://zziplib.sourceforge.net/) bzip2 (http://bzip.org/) c-ares (http://c-ares.haxx.se/) expat (http://expat.sourceforge.net/) fribidi (http://www.fribidi.org/) gdbm (http://www.gnu.org/software/gdbm/) libvpx (http://www.webmproject.org/) libxml2 (http://xmlsoft.org/) lzo2 (http://www.oberhumer.com/opensource/lzo/) pcre (ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/) libpng (http://www.libpng.org/pub/png/libpng.html) libsamplerate (http://www.mega-nerd.com/SRC/) sdl (http://www.libsdl.org/) openssl (http://www.openssl.org/) libcurl (http://curl.haxx.se/) glib (http://www.gtk.org/) libmms (http://sourceforge.net/projects/libmms/) jasper (http://www.ece.uvic.ca/~mdadams/jasper/) jsoncpp (http://jsoncpp.sourceforge.net/) tiff (http://www.libtiff.org/) sqlite (http://www.sqlite.org/) libmad (http://www.underbit.com/products/mad/)a libogg (http://www.xiph.org/ogg/) libvorbis (http://www.xiph.org/ogg/) freetype (http://www.freetype.org/) faad2 (http://www.audiocoding.com/faad2.html) flac (http://flac.sourceforge.net/) libsmbclient (http://www.samba.org/) python 2.4 (http://www.python.org/) libdaemon regex

System Tools / Processes:

dbus (http://www.freedesktop.org/wiki/Software/dbus) avahi (http://avahi.org) compcache (http://code.google.com/p/compcache/) lirc (http://www.lirc.org/) fuse (http://fuse.sourceforge.net/) ntfs-3g (http://www.tuxera.com/community/ntfs-3g-download/) xmlstarlet (http://xmlstar.sourceforge.net/) tzdata (http://www.twinsun.com/tz/tz-link.htm)