KISS_OSD icon indicating copy to clipboard operation
KISS_OSD copied to clipboard
verified publisher icon awolf78

All motors spinning in the same direction (right)

Open lcucurachi opened this issue 6 years ago • 2 comments

I have just configured my KISS FC V1 with KISS 25A ESC and they all spin in the same direction. No matter the protocol or the yaw configuration. What's going on?

lcucurachi avatar Nov 28 '19 20:11 lcucurachi

thats what they do. change it in esc flasher or solder jumper or swap 2 wires.

Cheers, Alex

On 28 Nov 2019, at 21:30, Lorenzo [email protected] wrote:

 I have just configured my KISS FC V1 with KISS 25A ESC and they all spin in the same direction. No matter the protocol or the yaw configuration. What's going on?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

fedorcomander avatar Nov 28 '19 20:11 fedorcomander

I soldered the jumper and that solved the problem but for some reasons on the kiss website (https://flyduino.gitbook.io/kiss-documentation/english-kiss-docu/kiss-esc-25a/esc-wiring-and-connections) it says: "This needs to be done only if you are NOT using DSHOT! " which kind of worries me. It is not very clear what they mean. If it's is bad or if you shouldn't need to do it.

lcucurachi avatar Nov 29 '19 10:11 lcucurachi