Not Working for Honda

[sabsteef]

Hi, I'm trying to getting this code working. I started to define Honda. but i get an error that i can't build the solution. You described that Honda is the same as Yamaha. so i tried that. The build works, but i can't get connected.

so i looked what's differents between Honda and Yamaha.

I've seen that there are typo's in YAMAHA and it sometimes spells YAMAYA. so for Yamaha it doe not get in the:

`#elif defined(YAMAHA)

handleRequest(request_sens, LEN(request_sens));`

And there is (i think) a problem. Request_sens is not declared. and when i declared it:

`#if defined(HONDA) #if defined(BIKE_CHOOSED) #error "two or more bikes choosed, please see src/PIDs.h" #else #define BIKE_CHOOSED #endif // BIKE_CHOOSED // see above #endif // HONDA

const uint8_t request_sens[] = {0x80,0x02} ` everything els fails to build the solution.

i got it connected correctly with some test scripts. And get some of a response. can you help me out? tnx stefan

[aster94]

Hi Stefan,

unfortunately I had only a suzuki, to make this lib working on it I googled a lot in the past months to discover which codes my bike needed to receive. To use it on Honda, yamaha, kawasaki you will need to find what your motorbikes "needs to listen". This is for example what suzuki needs to hear from us: https://github.com/aster94/Keyword-Protocol-2000/blob/fbc69fe9e10490a77c0a2008535af3ceb0cc74df/src/PIDs.h#L69

but i never googled for what the other brands needs. The error in compiling you see are due to this.

Since i don't have these bikes and even if i wrote the code i wouldn't be able to test the lib i didn't spent too much time with honda, kawasaki, yamaha, this is why there are typos

The "hand brake" between all the brands is the same, only a few values need to be changed inside the PID.h file. If you want i will be happy to help you, but before july i don't have a lot of free time ☹

[sabsteef]

Hi,

thank for the reply. im gonna try to look if i'm capable to make the work. i'm not that greate with this type of coding. otherwise il wait until july. tnx again, Stefan

[aster94]

If you have any question and you need any aid let me know, i will try to help Otherwise i will start "working" again on it in the first half of july because i brought a few months ago a kawasaki versys 😃

[sabsteef]

Hi Today I tried everything. But no contact with the ecu. Do you got some simple script. To figure out what’s wrong. Like some basic scripts that I can communicate step by step. It looks like I got some echo back but no real contact.

( Kawasaki 👍🏻nice)

Verstuurd vanaf mijn iPhone

Op 9 jun. 2019 om 21:27 heeft aster94 <[email protected]mailto:[email protected]> het volgende geschreven:

If you have any question and you need any aid let me know, i will try to help Otherwise i will start "working" again on it in the first half of july because i brought a few months ago a kawasaki versys 😃

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/aster94/Keyword-Protocol-2000/issues/3?email_source=notifications&email_token=AJILCLUI5JKEQ7OUQFUUWU3PZVKQXA5CNFSM4HWHM2IKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODXIQRFI#issuecomment-500238485, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AJILCLSTIL65PT53WU2D4W3PZVKQXANCNFSM4HWHM2IA.

[aster94]

Before starting which bike do you have? Are you ABSOLUTELY sure your bike uses the KWP2000? Can you post a schematics of your setup?

[sabsteef]

hi, i got a honda VFR 1200. As far as i know it uses k-line. i connected the L9637 chip like your diagram. see images. i uses an AD mega. and use serial for debugging. and serial1 for connection to the Kline interface. i can make the honda talk. but its ramdom jebber.

the code that tried is: `#define debug Serial #define bike Serial1 #define TX_PIN 18 byte message0[] = {0xFE, 0x04, 0x72, 0x8c}; //FE 04 FF FF wakeup byte message1[] = {0x72, 0x05, 0x00, 0xF0, 0x99}; //'72 05 00 F0 99' # initialise communications byte message2[] = {0x72, 0x07, 0x72, 0x11, 0x00, 0x14, 0xF0}; //'72 07 72 11 00 14 F0' # request all of table 11 data

void setup() { debug.begin(115200); }

void loop() { char incomingCommand = 0; while (debug.available() > 0) { incomingCommand = debug.read(); debug.print("\nCommand: "); debug.println(incomingCommand); }

if (incomingCommand == 'S') { initHonda(); } checkResponse(); }

void checkResponse() { while (bike.available() > 0) { byte incomingByte = bike.read(); debug.print(incomingByte, HEX); debug.print(' '); } }

void initHonda() { debug.println("Starting sequence"); bike.end(); digitalWrite(TX_PIN, HIGH); // this is not an error, it has to came before the pinMode pinMode(TX_PIN, OUTPUT); delay(70);

digitalWrite(TX_PIN, LOW); delay(200);

bike.begin(10400);

bike.write(message0, sizeof(message0)); // the kwp2000 needs 10ms between two bytes, here we are sending them all together bike.flush(); // wait to send all // No response is expected

// wait 200ms and avoid echo debug.print("Echo: "); uint32_t start_time = millis(); while (start_time + 200 > millis()) { checkResponse(); }

bike.write(message1, sizeof(message1)); // same here // respond: 02 04 00 FA debug.println("\nWaiting response 1"); delay(400); { checkResponse(); }` if i use a computer and a kkl cable i can communicate ( like reading the error codes)

[aster94]

Stefan, even if i would like to help i can't because i have a public tender in a few weeks and i really need to focus on that 😔

[aster94]

hi @sabsteef I just released a new version compatible with kawasaki motorbikes along with a lot more improvements. Do you wish to test some code for honda/yamaha?

[sabsteef]

Sure. 👍🏻

[vaz83]

Hello, I am also trying to comunicate with a Yamaha YXZ 1000R ECU to read gear indicator, speed, rpm, temps, etc. Can you help me? I will have all the hardware tomorrow. I am working on a telemetry project and trying to read the data from the ECU. Regards from Portugal

[vaz83]

Hello?

[aster94]

@vaz83 you already opened an issue, please write only there and leave this only for honda