Jorrit Pouw

> > Would be great if someone with the new module could sniff out the unknowns. If someone has the new WiFi module and is able to send it to...

@kARTechnology I guess the more the merrier. DYLaKo is also lending his WF-RAC to me so I can do some SPI sniffing as well. If you'd do the same at...

Just wondering if there is a way to solve this without changing the pins to the default for UART0? I am attempting to create an ESPHome set-up with off-the-shelf devices...

@Jalle19 thanks for your reply. I see you are using a newer version of minisatip (https://github.com/perexg/satip-axe/issues/167) and are using the -U parameter patch to limit adapters to certain sources. Would...

@absalom-muc So @DYLaKo has sent his MHI official WiFi remote to me to do some SPI Spy'ing for you. I've also bought some JST-XH connectors so I can hook it...

These messages are normal for components that poll stuff/process a lot of values. ESPHome runs everything single-threaded (developers don't think multi-threading is necessary as the ESP generally has more than...

> https://www.nodo-shop.nl/en/our-products/228-espac-wifi-mitsubishi-heavy-industries-interface.html Good choice! That should work much better. Let us know how it fares and if it solved your issues.

This is not really a bug; it's just the ESPHome devs that decided to put in a notice when anything causes the mainloop to be busy for more than 30ms...

If you goal is to consume all your solar generated power 'as seen from the meter' (so not the 'actual' power), then you could theoretically switch over to single phase...

> Just to make it more clear: The solution still is according to the 6A minimum current. It does not go below the 6A. The "trick" is just to have...