cedar

cedar copied to clipboard

LicheePi Zero - ION_ALLOC_ERROR after increasing CMA_AREAS and CMA_SIZE_MBYTES

10

Hey, First, thanks for uploading the driver and library. I managed to compile both for the Lichee Pi Zero (V3S) following your instructions, but I am still getting ION_IOC_ALLOC even...

matheusrfdesign

ffmpeg - Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height

24

Im trying use this cedar with ffmpeg and get: # ffmpeg -f lavfi -i testsrc=duration=2:size=1280x720:rate=30 testsrc.h264 -y ffmpeg version 4.2.2 Copyright (c) 2000-2019 the FFmpeg developers built with gcc 8.4.0...

niyazFattahov

Possible support for new Mainline kernel 5.10?

1

Hi, is it possible to port the solution to mainline kernel 5.10? I have a [pinecube camera ](https://wiki.pine64.org/wiki/PineCube) with S3 chip. Linux supports this device since 5.10. I have try...

m3730r

Issues with cedar on F1C100S (Bittboy/PocketGo)

1

Hello, i had managed to compile your cedar kernel drivers in my own branch here for the bittboy/pocketgo kernel (4.14) : https://github.com/gameblabla/kernel/commits/master The PocketGo/Bittboy use an F1C100S (ARMv5) with only...

gameblabla

Fixes for 6.1 kernels (probably works with 5.10+, but untested)

1

Update to latest kernels, mostly copied from https://github.com/PaserTech-Hardware/cedar, but keeping the aodzip structure.

peteallenm

你好，有可以支持H313或者H616的版本吗，我用linux主线6.6.56版本，但是目前好像有支持的都没有我这俩芯片并且Linux最高好像只看到支持到五点多的？想问一下有没有支持到6.6.56的可以在H616或者313用的？

986046679