midea-ac-lib

midea-ac-lib copied to clipboard

target_temperature will not change

3

Hi, I just tried your lib. This is really great stuff! Everything is controllable (fan speed, on/off, cooling/only fan) but not the temperature. When I tried to change it from...

slydlake

Fan Only Workaround fix

3

About the fan only problem i would recommend to see @mac-zhou 's implementation for the issue at https://github.com/mac-zhou/midea-msmart/blob/master/msmart/device.py#L195 that introduces an update_special method that updates only indoor and outdoor_temperature. Unfortunately...

gdagalakis

finer grained temperature control, Fahrenheit display on AC, LED on/off

2

Closes #8, closes #9, closes #10, needed by https://github.com/andersonshatch/midea-ac-py/pull/30

aa755

Feature request: direct communication to the device (bypass Midea altogether)

6

I did some packet captures of communication between the cloud and the device and seen the strings similar to this: `c00087667f7f003c0000006347000000000000000000006c3000000000000000000000000000000000` It seems that the format is very similar to...

velaar

add ability to control temperature unit displayed on the AC

5

aa755

aa755

aa755

I have 4 Midea Blanc which go to FP (Frost Protection) whenever I try to control them. Another unit from Carrier works very well, with the same Hassio integration.

xenonshop

Single request tend to fail after some inactivity

10

After not issuing any commands for some hours - next command fails (throwing error below). After that error - all following commands are working as intended. Action I tried to...

Maczuga