HASwitchPlate

HASwitchPlate copied to clipboard

Esphome + Nextion mqtt

1

esphome communicates api with nextion but I would like to use mqtt commands. I have activated mqtt in esphome and when I press a button on the display I get...

hassiomanuel90

correct markdown link

ooii

Some pages not included in demo

1

Hi, I have a six working hasps in my home. Now I am using for RGBWW lights only page 1 on all hasps. Is possible use page 6 as the...

proasnet

Configuration Saved, but immediately forgotten

1

I am having a persistent issue with 0.40 that causes the configuration, expect for SSID and SSID password to be "forgotten" or not "sitck", and even the board name reverts...

mpoli

https://github.com/aderusha/HASwitchPlate/blob/master/3D_Printable_Models/README.md The filament suggestion link on that page goes to AmazonBasics White PETG in 2.85mm. I'm not sure how your Prusa i3 is configured, but my MK3S+ takes 1.75mm and...

kdegraaf

Alarm

1

I'm having an issue where if the alarm is "pending" or "triggered" the HASP will not allow for it to be disabled. Only if it is "away_home" mode. This isn't...

josheharvey

Backlight MQTT message ignored if page set payload is first/same time.

2

I have an automation that worked before the update to the latest beta/dev branch bin as of 11 days ago. My Screen now flickers when changing pages, no big deal....

marc-gist

Hi, Are there any plans to release UK/EU size?

zuhair68

Hi, is possible add a temperature sensor funcionality for sending to Home Assistant and control room temperature? For example DHT22 or analog to AI pin. Thank you.

proasnet

Hi, I have builded a prototype your HA Switch and is working with my Home Assistant. Now, I tried edit a HMI file with Nextion Editor and I used a...

proasnet