FretFind2D
FretFind2D copied to clipboard
acspike
A web-based fretboard designer for microtonal and multi-scaled stringed instruments
This PR implements the changes to the user interface suggested in https://github.com/acspike/FretFind2D/issues/9 by user @piiit-creates https://github.com/piiit-creates. I have updated those changes with the latest changes to master.
I'm writing right now a website for building homemade instruments from trash. As I'm primarily building guitars, I'm of cause quite interested in fret calculation and this fret calculator is...
While this is a powerful tool, I think it would be handy if there were more options other than just the octave for equal divisions. There doesn't need to be...
It would be nice to have Fret2Find debug the bridge angle. Even better would be an automatically calculated perpendicular distance from specifying bridge abgle and scales.
Importing a DXF into rhino: The file is Blue. The file is completely upside down, and with multi scale the file is completely mirrored.
A lot of builders like to have the overhang Taper toward the end of the fretboard. For example a 3mm overhang at the nut and a 4mm overhang at the...
MM/Inch
Add the option to use MM as the general units, but also be able to use Inch for the scale length. For example I always work in metric, however my...
The DXF Export is very broke. It exports frets as 5-6 pieces each. None of them able to be joined to the next as the segments over lap. The sides...
I used fretfind2d to 3d print a fretboard and it worked really. However one thing I noticed was that the fret slot width was slightly too wide. When I placed...
