aanon4
Using TI serial bootloader for BlueBasic
Hello, Now, with latest firmware it is possible to upgrade firmware for cheap HM-10/HM-11 module via UART, using serial bootloader protocol (http://processors.wiki.ti.com/index.php/SerialBootLoader)
Can I upload BlueBasic firmware this way into HM-10/11 module?
I've never investigated using the SerialBootLoader so I have no idea if it would work or if the HM-10/11 modules even use it. Maybe it could be made to work, and I'd be happy to accept a pull-request which does this, but I'm afraid I won't be doing it.
@0xFACE My TI SmartRF Programmer does not seem to recognize my CC2541. So I am really interested in the serial method. Did you figure something out?
Unfortunately not. Some of HM-xx modules from China have a serial firmware boot loader enabled. And it is possible to upgrade its firmware via serial interface. Not sure it is possible for the BlueBasic firmware. Ask this question here: https://github.com/kscheff/BlueBasic, this repository is under active development.
bbconsole may help you. It has been a while since I worked on it. https://github.com/ozarchie/BlueBasic
On Sun, Nov 22, 2020 at 8:02 PM Piotr [email protected] wrote:
Unfortunately not. Some of HM-xx modules from China have a serial firmware boot loader enabled. And it is possible to upgrade its firmware via serial interface. Not sure it is possible for the BlueBasic firmware. Ask this question here: https://github.com/kscheff/BlueBasic, this repository is under active development.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/aanon4/BlueBasic/issues/18#issuecomment-731724122, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABRN2J7EWTEMPVMDNOWJH3TSRDOSDANCNFSM4BK5D5DA .
