I'm getting weird numbers and outputs from the pulse sensor

[quackamadoodleduck]

Please help quick! I'm getting weird numbers and outputs when I run the code with the pulse sensor 0,600,0 583 0,604,576 0,604,574 0,604,569 0,604,562 0,604,556 0,604,547 0,604,547 0,604,543 4,587 0,604,586 0,604,584 0,604,583 0,604,576 0,604,574 0,604,569 0,604,562 0,604,556 0,604,547 0,604,547 0,604,543 0,600,0 0,600,434 0,600,418 0,600,424 0,600,444 0,600,459 0,600,474 0,600,485 0,600,495 0,600,502 0,600,505 0,600,504 0,600,507 0,600,510 0,600,513 0,600,510

[quackamadoodleduck]

Please help, I can't figure out any way to solve this

[joelSensor]

Did you make any modification to the Pulse Sensor code?

The Arduino sketch is defaulted to output for the Arduino Serial Plotter. Take a look at the read-me guide for notes on that. Try running the Arduino Serial Plotter to see if that makes the numbers make sense

[quackamadoodleduck]

thanks, but is there any way I could somehow output to the serial monitor? any help is welcome thank you so much

On Wed, Feb 22, 2017 at 1:57 PM, Joel Murphy [email protected] wrote:

Did you make any modification to the Pulse Sensor code?

The Arduino sketch is defaulted to output for the Arduino Serial Plotter. Take a look at the read-me guide for notes on that. Try running the Arduino Serial Plotter to see if that makes the numbers make sense

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/WorldFamousElectronics/PulseSensor_Amped_Arduino/issues/42#issuecomment-281817462, or mute the thread https://github.com/notifications/unsubscribe-auth/AXivvVcAX3q-__tOF-BJAT4YEzwVfr7rks5rfK8ugaJpZM4MGunm .

[joelSensor]

I'm not sure what you mean by output to the serial monitor. What do you want to output to the serial monitor?

[quackamadoodleduck]

the BPM itself

On Thu, Feb 23, 2017 at 8:22 AM, Joel Murphy [email protected] wrote:

I'm not sure what you mean by output to the serial monitor. What do you want to output to the serial monitor?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/WorldFamousElectronics/PulseSensor_Amped_Arduino/issues/42#issuecomment-282041627, or mute the thread https://github.com/notifications/unsubscribe-auth/AXivvc3CXFMF36Jpc_LiwR-jl1Sk-RaEks5rfbJagaJpZM4MGunm .

[joelSensor]

At the top of the main page on the sketch change the outputType variable to outputType = PROCESSING_VISUALIZER Then In the main loop, comment out the line serialOutput() by putting // in front of it. Then, in the AllSerialHandling tab, comment out the line sendDataToSerial('Q',IBI);

[quackamadoodleduck]

Thank you so much :D

On Fri, Feb 24, 2017 at 7:13 AM, Joel Murphy [email protected] wrote:

At the top of the main page on the sketch change the outputType variable to outputType = PROCESSING_VISUALIZER Then In the main loop, comment out the line serialOutput() by putting // in front of it. Then, in the AllSerialHandling tab, comment out the line sendDataToSerial('Q',IBI);

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/WorldFamousElectronics/PulseSensor_Amped_Arduino/issues/42#issuecomment-282315451, or mute the thread https://github.com/notifications/unsubscribe-auth/AXivvbrROPiJCFFglyLWrd2E8KYJR5b_ks5rfvOcgaJpZM4MGunm .