WebDust21

Can I see the changes to the code? It's worth noting that the Bluetooth device scan does return the "reserved_2" bits--which is how I was able to determine that the...

Just installed Flameshot...and found this issue less than 10 minutes later while looking for a way to do just this... It's not impossible to do in Linux, as both GIMP...

OR....you can just use the official ESP-Modbus library for the ESP32: https://github.com/espressif/esp-modbus #dontreinventthewheel

a) You will need a LOT of in-depth knowledge of programming processors from the ground up. "Bare metal" means literally that: there is no structure present that you don't bring....

Do you have the USB OTG adapter pictured in @minilogic's example video? That may be critical. Also note that the UART output is over separate pins, which @minilogic broke out...

> From the picture above, if it's the piece circled in red. I don't have it. But if it's the one with the green circle, I have it because the...

> As for the board, which is circled in red, this is an external power and debug adapter: kinda what I figured it was ;-) My main goal for delving...

> Today I tried to connect LVGL version 9.1.0 to this project, but it didn't work (but the older version of LVGL that came with the project worked). Can you...

So I have not (yet) worked in-depth with LVGL and a direct video framebuffer going to hardware. However, there is a basic issue with the LVGL setup (even in the...

@minilogic Woohoo, you're the best! That's surprisingly smooth rendering behavior...I may not need to reinvent the TinyUSB wheel with the V3s after all... If I created a F1C200s replacement board...