RadioConsole2
RadioConsole2 copied to clipboard
W3AXL
Expandable software console for controlling radios and radio systems remotely via WebRTC.
### Summary Add a “Caller ID” display on each radio card in RadioConsole2, with a new configuration option to toggle between inline (card) and overlay (drawer) views. --- ### Motivation...
Integrate Elgato StreamDeck Plus hardware into RadioConsole2. --- ### Summary Integrate Elgato StreamDeck Plus hardware into RadioConsole2 as a full hardware interface that: - Could render each “radio card” (channel/preset)...
**Describe the bug** After downloading the release, AppData\Roaming\rc2-console\config.json is broken and you are unable to create new radios under the pencil menu. **Device Information** - OS: Windows 11 - RC2...
Currently, PTT functions as a momentary button. It would be helpful to add an option in the console configuration to enable a toggle mode; press once to key up, press...
Add a new console resource that supports stream URLs as receive-only (RX) resources, using the same UI as the existing radio resources.
Add support for sending the standard TIA tone remote commands Allow for additional configuration for channel/function tones mapped to channel up/dpwn and softkeys
Add support for 4-wire E&M control of radios using CM108 USB soundcards and their GPIO connections. Many low-cost radio interfaces utilize the CM108/CM119 soundcard chips (including my own [MicroTNC](https://github.com/W3AXL/MicroTNC))
Top-level ticket for tracking addition of new radio control modes