VCVRack
Sequential Switch setting to disable internal anti-pop slew limiter
Route gate to input of sequential switch 1 Route same gate also to clock input of seq.sw. Set button of Seq.sw.. to top postition , so it alternates bewteen two gates. Route the two outputs to 2 different destinations , make sure these destinations sound different ..so it's easier to spot the bug The bug is that sometimes the previous gate is still outputted when it shouldn't , resulting in a slight trigger of the destiantion ( when it shouldn't ).
I believe the issue may be caused by the internal slew limiter in the Sequential Switch, and regarding my last comment in issue #53, one sample step is definitely not enough. In the following setup, with a 2ms delay, I get a correctly divided clock to trigger a snare every four beats of the LFO, but if I set it to a 1ms delay, then I get a snare every two beats of the LFO, which is not ideal given we are trying to divide by 4.
I think we should keep the slew limiter in Sequential Switch because it makes the audio experience correct, otherwise it's useless for audio, it's main use case.
Could we perhaps have an option in the right-click menu to disable the slew limiter? I've been using the Sequential Switch to select different voltage sources to send through as the root note of a chord which is then sent to an arpeggiator. Unfortunately, the first note, directly after any switching, is often incorrect because of the filtering.
