Thickness of panels

[Batfather]

Good day!

I want to clarify what is the thickness of panels. As I see right panel has 5mm thickness, and left is 6mm. Is it right?

Some questions more: Alu/PE/Alu - is it an aluminium composite? If yes, can I use 4mm panels and not 6mm, like in drawing? Will the quality be damaged cause of this?

Thanks

[harmawoldhuis]

Hey,

I'm not sure what went wrong with the panels. All panels are 6 mm. Some are of perspex (sides). The rest is of a dibond sandwitch material with ALU: 0.3mm (x2) and PE: 5.4mm

I wouldn't try with 4mm panels: you need to find other bearings, other electronics etc and it will be a lot less rigid.

Kind regard,

Harma Woldhuis

2015-05-25 19:25 GMT+02:00 Evgeniy Koltsov [email protected]:

Good day!

I want to clarify what is the thickness of panels. As I see right panel has 5mm thickness, and left is 6mm. Is it right?

Some questions more: Alu/PE/Alu - is it an aluminium composite? If yes, can I use 4mm panels and not 6mm, like in drawing? Will the quality be damaged cause of this?

Thanks

— Reply to this email directly or view it on GitHub https://github.com/Ultimaker/Ultimaker2/issues/17.