TwoCanPlugIn

I would be interested as well, if only to verify what I am already parsing. Haven't been able to retest this year, but at the end of last year, pretty...

OK, Here goes. I was able to "borrow" neighbour's boat on weekend to capture some more data. It agrees what I had written earlier and at least for scenario 1....

Oops, forgot to add Non Follow Up mode (NFU). When autopilot is in Standby. Again PGN 130850 sent from MFD to Controller. The usual palaver, Byte 2 is the autopilot...

My observations from two different AIS transponders (Icom, Digital Yacht) are the following: gpsFixingDevice = byte[33] & 0x1F; reserved = (byte[33] & 0xE0) >> 5; sequenceIdentifier = byte[34]; Apologies that...

The standard is relatively old, dates from 2014 ! Here are two candump samples for you, both containing examples of PGN 129810, Class B, Static Data Part B. melbourne.log uses...

Kind of related to the overall intent of this [discussion topic.](https://github.com/OpenCPN/OpenCPN/discussions/3773) Another example of options that should be greyed out (disabled) depending on the setting of another option.

FYI, Rudimentary testing of NMEA 0183 DSC messages. Fortunately no regressions found with my limited testing :-)

Little, other than both are/were processed somewhere in the bowels of ais decoding and I was worried about yet another regression.

It works correctly for me using NMEA 2000. And the code snippet that generates the "pretend" Actisense format after converting a candump log. ``` stream

There's definitely something weird with the Data Monitor, Loopback interface and NMEA 0183 data. Following table describes what is and is not displayed. |Setting|Loopback NMEA 0183 displayed| |------------|-------------| |Default |...