OrcaSlicer

OrcaSlicer copied to clipboard

Port "No Unsupported Perimeters" feature from SS

23

- [x] Implement Feature - [x] Test Feature - [ ] Add config manipulation Original Feature from SS  fixes #2402

Ocraftyone

ENH: Introduced experimental option to fully disable solid infill against walls when ensure vertical thickness is turned off

23

Introduced experimental option to fully disable solid infill printed against sloping walls even when ensure vertical thickness is turned off. Aiming to address: https://github.com/SoftFever/OrcaSlicer/issues/3224 also possibly this: https://github.com/SoftFever/OrcaSlicer/issues/3016 and this:...

igiannakas

Avoid Crossing Wall: Travel Along an Inner Perimeter Loop, Not Outer

2

SuperSlicer has a nice change to the "Avoid crossing wall" / "Avoid Printeds Parts" behavior, where instead of traveling along the outer perimeter, it used an inner perimeter intead: ...

CCS86

Monotonic Infill

4

*Is your feature request related to a problem? Please describe.* I print some parts (sliced with SuperSlicer) with 100% Infill, monotonic sparse pattern at 0° angle for transparent petg parts....

Pamapama

Make the sidebar resizable

7

**Is your feature request related to a problem? Please describe.** There are times when it would help if the sidebar was resizable. For example, under Output/G-code output there is a...

julie777

ENH: Experimental option to fully disable solid infill against walls when ensure vertical thickness is turned off - alternative implementation

6

This PR achieves the same outcome as https://github.com/SoftFever/OrcaSlicer/pull/3235 only with a different implementation approach. This one eliminates slightly less vertical infill however it is safer as it retains more of...

igiannakas

Seam Painter Line Tool

4

**Is your feature request related to a problem? Please describe.** When trying to draw seams, for me it's almost impossible to hand-draw a straight line with the seam painter tool...

jberry

ENH: Port of "wipe inside before extruding an external perimeter" feature from super slicer

4

Porting the wipe inside before extruding an external perimeter feature from Super Slicer. This helps reduce seam visibility and visibility of slight over extrusion at the start of an external...

igiannakas

Add new filaments profiles

1

1.Add two new filaments profiles 2.Optimize some filaments naming issues

Hukete

OrcaSlicer V1.9.0 Alpha 取消打印并上传后，重新上传会卡死

1

### OrcaSlicer Version V1.9.0 ### OS version windows11 ### Additional system information cpu 13600kf 内存 光威6000 16*2 固态 大华c900plus 1t 主板 双敏b760m 显卡 盈通大地之神4060ti ### Printer 启庞KLP1 ### How to...

pudding1111