Snurring

Hi, I've made some attempts installing DietPi on my Beaglebone Black SBC using the prep script. The installation failed in a similar fashion described by pitsi. **Required Information** DietPi version:...

Tanks. I'll make an attemt next week (not at home atm.). The beagleboard software uses the legacy udev/systemd naming scheme, so the ethernet if is eth0. Originally, the boards were...

Ok. I have done some testing and finally got the PREP-script working. What you suggested didn't quite work, but I was able to make a script that works based on...

@MichaIng The network is up until connman is purged. After purging it goes down and a reboot is needed.

Yes. It did not go down until I purged connman. 1. I changed the script to only do the /etc/network/interface modification and ran it first. 2. Installed resolvconf, enabled network...

@MichaIng Ok. My bbb is not headless (got a 7" touch lcd attached) so I did not think of that. I'll do a test with this in mind.

With connman installed it will overwrite the symlink at reboot even if the service is disabled. I tested this and the installation failed because it couldn't resolve when reaching PREP...

I successfully did a remote install from ssh. 1. Run the prep-bbb.sh script [prep-bbb.sh.txt](https://github.com/MichaIng/DietPi/files/3489026/prep-bbb.sh.txt) 2. Reboot 3. Purge connman (sudo apt-get -y purge connman) 4. Restore resolvconf symlink (sudo ln...

I don´t tink so. As stated in the bug report I have tried several SD-cards and the behaviour is the same. I tested the integrity of one of them with...

dmesg seems to return with I/O error when fault condition is present