SmartEVSE-2
SmartEVSE-2 copied to clipboard
SmartEVSE
Smart Electric Vehicle Charging Station (EVSE)
I have updated my smartEVSE V2.02 to version 2.30 because I want to use the solar function. Between +12V ==> I/O1 (LED) I have an LED and between I/O2 (sw)...
Hi, I'm having problems with my ZOE in combination with the SmartEVSE. When it enters the C state with the preset max current the car interrupts the charging to start...
Was playing today a bit with SmartEVSE and there is a small issue with RCM error display. But the issue is only cosmeticall with an easy improvement. When RCM error...
Hi. What's with the re-init of LCD at contactor open and close functions? Surely, this is a quick patch not a solution. I'm volunteering to fix the HW issue causing...
### Description Context: My car has a very large range (400km) and I only need about 80% (60kWh) per week to remain full. I like the solar mode on SmartEVSE,...
It would be nice if SmartEVSE could be made compatible with https://github.com/evcc-io/evcc . EVCC would act as a charge controller so you don't have to put clamps in and it...
I am about to start working on a solution to integrate SmartEVSE into home automation, in my case that would be [Home Assistant](https://www.home-assistant.io/). The idea is to create an additional...
I noticed possible undesirable behaviour of the available current calculation.  My Hyundai Kona connected and the SmartEVSE set to smart charging, with max 6A import set and timer at...
Hi Just updated my SmartEVSE to 2.30. Where I was able to get the state from address 0x00A0 on FW 2.13, I'm not able to get in from 0x0000 on...
Probably hardware issue, not software issue. But want to rule out software before swapping hardware out. SmartEVSE was always working without issues. Great product. I have 2 in load balancing...
