error: dialing failed
I am seeing the following errors in my logs, not sure if there is a fix for it?
E[2020-07-20|05:54:18.462] dialing failed (attempts: 8): dial tcp 54.160.181.171:26656: i/o timeout module=pex [email protected]:26656
E[2020-07-20|05:54:18.462] dialing failed (attempts: 8): dial tcp 54.208.5.36:26656: i/o timeout module=pex [email protected]:26656
I got same issue
E[2020-07-20|12:05:51.908] dialing failed (attempts: 1): dial tcp 35.174.11.202:26656: i/o timeout module=pex [email protected]:26656
E[2020-07-20|12:05:51.909] dialing failed (attempts: 1): dial tcp 18.206.85.193:26656: i/o timeout module=pex [email protected]:26656
E[2020-07-20|12:05:53.937] dialing failed (attempts: 1): auth failure: secret conn failed: read tcp 10.128.0.2:47858->100.26.110.175:26656: i/o timeout module=pex [email protected]:26656
Same error
E[2020-07-20|08:38:21.682] dialing failed (attempts: 2): dial tcp 18.233.100.57:26656: connect: connection refused module=pex [email protected]:26656 E[2020-07-20|08:38:21.682] dialing failed (attempts: 1): dial tcp 18.207.1.210:26656: connect: connection refused module=pex [email protected]:26656 E[2020-07-20|08:38:21.682] dialing failed (attempts: 1): dial tcp 18.207.1.210:26656: connect: connection refused module=pex [email protected]:26656 E[2020-07-20|08:38:21.683] dialing failed (attempts: 1): dial tcp 3.222.117.144:26656: connect: connection refused module=pex [email protected]:26656 E[2020-07-20|08:38:21.987] Stopping peer for error module=p2p peer="Peer{MConn{3.92.81.28:26656} 60a4d4310878ee664cb2ed4d74f79d3940df595a out}" err=EOF E[2020-07-20|08:38:22.432] Connection failed @ recvRoutine (reading byte) module=p2p [email protected]:36656 conn=MConn{88.198.63.78:36656} err="read tcp 10.0.0.4:42940->88.198.63.78:36656: read: connection reset by peer" E[2020-07-20|08:38:22.432] Stopping peer for error module=p2p peer="Peer{MConn{88.198.63.78:36656} 90f3532d6d2b0e7ebe05d71c2d262664d55400bf out}" err="read tcp 10.0.0.4:42940->88.198.63.78:36656: read: connection reset by peer" E[2020-07-20|08:38:22.612] dialing failed (attempts: 1): dial tcp 35.174.11.202:26656: i/o timeout module=pex [email protected]:26656 E[2020-07-20|08:38:24.681] dialing failed (attempts: 2): auth failure: secret conn failed: read tcp 10.0.0.4:37808->54.84.67.39:26656: i/o timeout module=pex [email protected]:26656 E[2020-07-20|08:38:24.684] dialing failed (attempts: 2): auth failure: secret conn failed: read tcp 10.0.0.4:50532->54.208.5.36:26656: i/o timeout module=pex [email protected]:26656
me too
The error is most likely from tendermint PEX module. Usually adding some full nodes as persistent peers solves the problem.
I also got the same error, and the seed was found here
https://github.com/certikfoundation/testnet/blob/master/shentu-rts-3/seeds.txt