Rem0o
Was Auto setting changed
Cpu fan set to Auto with 40c=40% minimum and 70c=100% max)
Fans will sometimes just start ramping down to 40% and get stuck there unless I change it back to a flat example and then back to Auto. 5 minutes later it will slowly ramp back down and get stuck at 40% even if temps dictate it should be at 60-80%. Maybe I am misunderstanding how Auto works?
Back when it was Autobeta it seemed to work like, for example let's say 40c=40% min 70c=100%max, if it was 55c it would be at like 70%. I'm unsure if I should be swapping to a different mode now as Autobeta was always what I used and it seemed to work intuitively similarly to the example. It still sometimes seems to work how it was described above but other times will just go to minimum.
Auto didn't change. As long as the temp stays under 70, the fan will try to get as low as possible.
