Rem0o
Adrenaline tuning settings
First of all, so far, it works! So thank you!
But as with every development, some funny things happen:
Fan #0 reports the same fan speed as the newly created fan #8. But Fan #0 is not able to control the speed, only the new one does.
0 RPM setting seems to not be working correctly
And last but not least, fancontrol seems to change the advanced control settings off for GPU and VRAM tuning options
These are just details, though! thank you!!
Because than Fan0 must be coming from LibreHardwareMonitor, while the new one is from the plugin.
As for the tuning options, I'm not sure why they get reset. 🤔
I can confirm that FanControl with this plugin changes all the settings, including tuning settings, in Adrenalin. Not sure it applies them tho. RX 6900 XT here.
Edit: Also confirming that 0 rpm does not work, the fans don't want to go slower than 15% in my case.
No issue with the 0RPM for me but i can also confirm that the advanced control switches are automatically disabled by the plugin for GPU and VRAM settings. This is particularly annoying when setting the GPU voltage because every mV counts (at least for 7x00 series) and AMD hasn't bothered to add decimal percentages (so 1% corresponds to 11mV~12mV).
6700 XT, also noticing the plugin disables advanced control switches. Otherwise, it's been a great plugin for me so far!
The zero RPM works for me but setting the graph anywhere below 15% on the fans doesn't work. I also do not believe that if the GPU is over 50c that zero rpm works
Same here on Vega 56 and 64 and latest Adrenaline 24.3.1. Fan Control works but when it's controlling GPU fans, the switches in Adrenaline behaves weird. Overclock/undervolt is impossible since Core/HBM/Voltage switches disables itself instantly, Fan Tuning and advanced curve switches on and off from time to time and profile is jumping from Custom to Default. It stops behave like that when GPU fan controlling is disabled in Fan Control.
Moreover % and RPM aren't synchronized in Fan Control. Fans works from 10-100% in Adrenaline and it correspond in 250-2020RPM however, 10% in FC is 500RPM and fan reaches max RPM at 41%. 0% in FC is 250RPM but then 1-9% appears to be controlled by something else according to FC and next possible value is 10% 500RPM. Lowest in Adrenaline is 10%, no Zero RPM for these reference AMD/ASUS models.
Good news: https://github.com/Rem0o/FanControl.ADLX/discussions/36
0 RPM mode should work properly now.