RROrg
BUG DVA3221 doesn't boot
请填写以下信息.
Please fill in the following information.
Install ENV: (You can find it in the boot interface.)
- DMI: H610-HDV/M.2
- CPU: i5-12400
- NIC: (pid & vid) i219-v or r8152
RR version: (You can find it in the update menu.)
- RR: different (from latest 24.6.9 to 23.12.23)
- addons: default
- modules: default
- lkms: prod
DSM:
- model: DVA3219 / 3221
- version: any (7.0 / 7.1 / 7.2)
Issue: DSM doesn't boot, and the network doesn't start.
logs:
logs.tar.gz
(请先看一下#173、#175、#226的内容)
(Plz review the content of #173, #175, #226 first)
...
... 如果你提供不了详细信息，那就等有缘人吧! ... If you can't provide detailed information, then wait for someone who is destined!
Seems to me it isn't mine, because I had never been run ds920 with usb flash. I assure it is located inside loader by default
ds920 from your hard drive system
Unselect cdc_ether in modules menu and rebuild, retest
thank you! I remove all hdd from system. after that I've got ping but still no connection to dsm also I unselect cdc_ether in modules
Could you please review log file logs.tar.gz
@wjz304 thank you! I've checked two additional external usb adapters on rtl 8152(1g) and 8156 (2.5g) with the same results - no boot :( Could you please review one more log where I ran it with external usb network logs.tar.gz
I've tried direct boot, but the result is the same—it didn't boot log file please see below logs.tar.gz
Have you checked the routing?
All logs have a weird problem, messages are empty, (I don't know why) From dmesg.log, I can see that the network cards are recognized normally and there is no error message. However, whether DHCP to IP is normal can only be known through messages.
You can try other models, such as sa6400
What do you mean the routing?
SA6400 and DS920 works very well on this hardware
