Q-engineering
Q-engineering
In that case it should (eventually) work; you use the same hardware.
Unfortunately, there are two versions of the OV5640 connector. Since they have 24 pins, they both fit in the camera slot. However, the pin numbers are reversed. You will get...
@NekoCWD, Be careful! The connector is **_not_** double sided! On one side you get gold plated copper fingers. On the other side you have a transparent folio carrying the wires...
@NekoCWD, The connector on the PCB is **_not_** double sided (just as the cable).  The side mounted on the PCB holds the pins. The opposite side has no electrical...
@crudo0-arch, Could you get the 1080 x 720 UDP stream working? It's given as an example in the Readme.
@crudo0-arch, Several things come into play here. You only have a small amount of RAM on board. 500Mb gives you little space, all the more so because the Armbian OS...
Unfortunately you can't boot on CLI. Not sure if more swap space will solve anything here. 4 GB is a lot BTW, how much memeory do you have available after...
I don't think so.
Indeed. Your problem is the lack of proper video software tailored to the hardware. The Raspberry Pi foundation has many programmers, some solely working on the Broadcam video stack. The...
Sorry to hear. I don't have a clue. Just run the repro on a clean RPi4 with OpenCV 4.4 and no problem at all. As you know -nan indicates a...