joycontrol
joycontrol copied to clipboard
Poohl
Emulate Nintendo Switch Controllers over Bluetooth
sudo python3 run_controller_cli.py PRO_CONTROLLER too many SPD-records active, Switch might refuse connection. try modifieing /lib/systemd/system/bluetooth.service and see https://github.com/Poohl/joycontrol/issues/4 if it doesn't work [23:47:29] joycontrol.device set_name::114 INFO - setting device name...
Tested in vmware 16.2 and virtualbox 7.0 using xubuntu 22.04.3 and a CSR8510 USB bluetooth adapter Nothing happens on the register screen and when testing in splatoon the "Reading amiibo...
thread on what we know about bluetooth-adapters and how to make them work: (TLDR commands below) # Brands & Chips Brand | Chip | works| Notes for V12 ---------|--------|------------|-------------------- Cypress...
Hi all, I've read most of the issues and their respective comments (especially #4) to try and circumvent the issues to get a working NFC-reading connection to no avail. As...
`[22:21:56] joycontrol.transport read::94 ERROR - No data received. [22:21:56] joycontrol.protocol connection_lost::262 ERROR - Connection lost. [22:21:56] joycontrol.transport pause_writing::198 INFO - pause transport write [22:21:56] asyncio default_exception_handler::1744 ERROR - Task exception...
The `run_controller_cli.py` script works perfectly for 1 input. But after sending it, the script throws a runtime error. Here is an example after I connected to the switch and simulated...
I've tried pausing before leaving the screen, trying to reconnect etc. but it keeps happening
