Unclear ingredient flow in certain charts

[OrderedSet86]

Referring to #17 , when the chart is fixed you get this confusing node labeling

There is a silent split of 0.45 sodium hydroxide happening to each side there but the labels make it look like that is not happening

Full yaml config

- m: mixer
  tier: HV
  I:
    purified bauxite: 32
    sodium hydroxide: 9
    quicklime: 4
    water: 5000
  O:
    bauxite slurry: 8000
  eut: 120
  dur: 10
  number: 1
- m: oil cracker
  tier: HV
  I:
    steam: 2000
    bauxite slurry: 32000
  O:
    heated bauxite slurry: 32000
  eut: 400
  dur: 8
- m: large chemical reactor
  tier: HV
  I:
    carbon dioxide: 5000
    heated bauxite slurry: 32000
    aluminium hydroxide: 1
  O:
    alumina: 80
    sodium carbonate: 9
    calcite: 10
    bauxite slag: 16
    sluice juice: 5000
  eut: 400
  dur: 15
- m: large chemical reactor
  tier: HV
  I:
    calcite: 5
  O:
    quicklime: 2
    carbon dioxide: 1000
  eut: 30
  dur: 12
- m: centrifuge
  tier: HV
  I:
    bauxite slag: 1
  O:
    rutile: 1
    gallium: 0.3
    quicklime: 0.2
    silicon dioxide: 0.9
    iron dust: 0.8
  eut: 120
  dur: 2
- m: centrifuge
  tier: HV
  I:
    sluice juice: 1000
  O:
    stone dust: 1
    iron dust: 0.4
    copper dust: 0.2
    tin dust: 0.2
    nickel dust: 0.2
    antimony dust: 0.2
  eut: 120
  dur: 2
- m: electrolyzer
  tier: HV
  I:
    sodium carbonate: 6
  O:
    sodium dust: 2
    carbon dust: 1
    oxygen: 3000
  eut: 60
  dur: 4.8
- m: large chemical reactor
  tier: HV
  I:
    sodium dust: 1
    water: 1000
  O:
    sodium hydroxide: 3
    hydrogen: 1000
  eut: 30
  dur: 10
- m: large chemical reactor
  tier: HV
  I:
    aluminium dust: 16
    sodium hydroxide: 48
    water: 16000
  O:
    sodium aluminate: 64
    hydrogen: 48000
  eut: 480
  dur: 20
- m: large chemical reactor
  tier: HV
  I:
    sodium aluminate: 4
    water: 2000
  O:
    aluminium hydroxide: 7
    sodium hydroxide: 3
  eut: 120
  dur: 2.5